화학공학소재연구정보센터
Journal of Loss Prevention in The Process Industries, Vol.20, No.4-6, 584-588, 2007
Detonation characteristics of ammonium nitrate and activated carbon mixtures
To better understand the detonation characteristics of ammonium nitrate (AN) and activated carbon (AC) mixtures, steel tube tests were carried out for AN/AC mixtures of various compositions and different forms of AN (powdered, prilled, phase stabilized and granular), and the detonation velocity was measured. The powdered AN/AC mixtures gave higher detonation velocities than the other AN forms. For all the AN/AC mixtures, the experimentally observed detonation velocities at each loading density were far below the theoretically predicted values calculated by the CHEETAH code based on thermohydrodynamics, exhibiting so-called non-ideal detonation. The lowest detonation velocity of powdered AN/AC mixtures was obtained as D = 1.25 km/s for an AC content of 0.1 wt%. This was considered to be close to the critical condition for stable detonation. (C) 2007 Elsevier Ltd. All rights reserved.