Various Portland cement pastes were made using water cement ratios of 0.20, 0.25, 0.35 or 0.40 and then cured for 1, 3, 7, 28, 90 or 180 days. These pastes were impregnated with acrylic acid monomer under vacuum and the monomer-impregnated samples were then treated at two different temperatures, 40 or 60 degrees C, for the polymerization process, using benzoyl peroxide as initiator. Several physicochemical studies were carried out on each cement paste; these studies include compressive strength tests, bulk density, compressive strength versus gel/space ratio relationships, polymer load, X-ray diffraction analysis and differential thermal analysis. Results have indicated that compressive strength improvement in acrylic acid-polymer impregnated cement pastes is mainly dependent on initial water/cement ratio, curing time and gel/space ratio. The results of X-ray diffraction analysis and differential thermal analysis indicated that the intrusion of polymer into the cement paste matrix does not affect the phase composition of the Portland cement hydration products.