Materials Chemistry and Physics, Vol.143, No.2, 480-485, 2014
A simple route to fabricate TiC-TiB2/Ni composite via thermal explosion reaction assisted with external pressure in air
The dense TiC-TiB2/Ni composite was successfully fabricated through the pressure-assisted thermal explosion reaction from Ti, B4C and Ni powder blends in air. The ignition temperature (625 degrees C) in air was 415 degrees C lower than that in vacuum. The decreased ignition temperature resulted from a chemical oven mechanism in which the oxidation and nitrification of Ti and the oxidation of B4C released the heat and promoted the occurrence of the thermal explosion reaction. The composites prepared in air and vacuum had similar phase constituents and microstructure. Moreover, the composite prepared in air possessed comparable hardness, flexural strength and fracture toughness to the composite prepared in vacuum. (C) 2013 Elsevier B.V. All rights reserved.