The aim of this research work is to investigate the sliding properties of the monotectic surface layers developed by a laser surface-treatment technology. The coatings-remelting technology has been chosen from the laser surface treatment methods. The surface of Al-Si alloy was coated with a lead layer by galvanizing, then the basic material and the surface layer were remelted together by using laser beam produced a monotectic Al-Pb surface layer. The structure of monotectic surface layer has been determined by means of a light microscope and scanning electron microscope. The sliding properties of the basic material (as cast, nearly eutectic Al-Si alloy), the Al-Si-Pb monotectic surface layer as well as the Al-Cu-Sn sliding bearing (Al-Cu matrix and Sn sliding layer) used in the gas industry have been investigated.