Diopside CaMgSi2O6 is an attractive material because of its multi applications. It was prepared by sintering the mixture at different temperatures (900 degrees C-1300 degrees C). Starting materials were pure SiO2 and dolomite raw materials. In order to improve the properties of sintered samples, such as the density egg white (ovalbemin) has been added into diopside. Furthermore, the effect of P2O5 addition on the sintering of the prepared diopside in the range of 0.5 to 5.0 wt% was studied as a function of the sintering temperature. A density of 96.5% of theoretical has been achieved when 5.0 wt% P2O5 was added, at a sintering temperature of 1225 degrees C, whereas the density of diopside samples, without P2O5 addition was lower than 83.0% of theoretical.