화학공학소재연구정보센터
홈 로그인 로그아웃 연락처 사이트맵
Polymer(Korea), Vol.38, No.5, 632-639, September, 2014
Export Citation
새로운 2,7-Dihydroxynaphthalene Bis(trimellitate anhydride) 무수물을 이용한 폴리(에스터 이미드) 공중합체의 특성
Characterizations of Copoly(ester imide)s with New 2,7-Dihydroxynaphthalene Bis(trimellitate anhydride)
주지은, 장진해†
  • 금오공과대학교 에너지융합소재 공학부
Jieun Ju, and Jin-Hae Chang†
  • School of Energy and Integrated Materials Engineering, Kumoh National Institute of Technology, Gumi 730-701, Korea
E-mail:
초록
Trimellitic anhydride chloride와 2,7-dihydroxynaphthalene을 이용하여 2,7-dihydroxynaphthalene bis(trimellitate anhydride) (2,7-TA)의 무수물 단량체를 합성하였다. 합성된 2,7-TA와 p-xylylenediamine 및 2,2'-bis(trifluoromethyl) benzidine(TFB)을 다양한 몰 비로 반응하여 얻은 폴리아믹산(polyamic acid, PAA)을 유리판에서 열처리하여 에스터기를 가지는 폴리이미드 공중합체(copolyimide, Co-PI)를 합성하였다. 합성된 Co-PI는 TFB의 몰 비 조성에 따라 열적 성질, 가스 투과도, 및 광학 성질 등을 조사하였다. 용액 캐스팅으로 합성된 Co-PI 필름은 유연하고 질긴 성질을 보였다. Co-PI 필름은 모두 투명하였으며, 각 필름의 cut-off wavelength은 370~395 nm이었고, 노란색 지수는 3.55~7.63의 비교적 낮은 값을 보여주었다. Co-PI 필름의 열적 성질들은 TFB의 몰 비가 증가할수록 증가하였지만, 산소 차단성과 광학 투명성에서는 반대의 결과를 보여주었다.
2,7-Dihydroxynaphthalene bis(trimellitate anhydride) (2,7-TA) was synthesized from trimellitic anhydride chloride and 2,7-dihydroxynaphthalene. Copolyimides (Co-PI) containing ester group were synthesized from 2,7-TA, pxylylenediamine, and 2,2'-bis(trifluoromethyl)benzidine (TFB). The Co-PI films were obtained from poly(amic acid) by solution casting through thermal imidization on a glass plate. The thermal property, gas permeation, and optical transparency of the Co-PI films with various TFB monomer contents were investigated. These Co-PIs could be solution.cast into a flexible and tough film. The cast Co-PI films exhibited high optical transparency with a cut-off wavelength of 370~395 nm in UV-vis. absorption and a low yellow index value of 3.55~7.63. The thermal property of Co-PI films increased linearly with increasing TFB content. However, the oxygen permeation and optical transparency of the Co-PI films was found to worsen with increasing TFB content.
Keywords:copolyimide;films;thermal property;gas permeation;optical transparency.
  1. Wang HW, Dong RX, Chu HC, Chang KC, Lee WC, Mater. Chem. Phys., 94(1), 42 (2005)
  2. Wang XL, Li YF, Gong CL, Ma T, Yang FC, J. Fluor. Chem., 129, 56 (2008)
  3. Ge Z, Fan L, Yang S, Eur. Polym. J., 44, 1252 (2008)
  4. Hsiao SH, Chen YJ, Eur. Polym. J., 38, 815 (2002)
  5. Lee EY, Hwang T, Nam JD, Polym.(Korea), 36(4), 448 (2012)
  6. Min U, Chang JH, Polym.(Korea), 34(6), 495 (2010)
  7. Saeed MB, Zhan MS, Eur. Polym. J., 42, 1844 (2006)
  8. Ma SL, Kim YS, Lee JH, Kim JS, KIm I, Won JC, Polym.(Korea), 29(2), 204 (2005)
  9. Hasegawa M, Horiuchi M, Wada Y, High Perform. Polym., 19, 175 (2007)
  10. Liu JG, Zhao XJ, Li Fan HS, Yang SY, High Perform. Polym., 18, 851 (2006)
  11. Choi CH, Chang JH, Polym.(Korea), 37(5), 618 (2013)
  12. Vora RH, Mater. Sci. Eng. B, 168, 71 (2010)
  13. Ramiro J, Eguiazabal JI, Nazabal J, Eur. Polym. J., 42, 458 (2006)
  14. Han JE, Jeon BK, Goo BJ, Cho SH, Kim SH, Lee KS, Park YH, Lee JY, Polym.(Korea), 33(1), 91 (2009)
  15. Behniafar H, Banihashemi A, Eur. Polym. J., 40, 1409 (2004)
  16. Jin HS, Chang JH, J. Appl. Polym. Sci., 107(1), 109 (2008)
  17. Sato M, Inata M, Yamaguchi I, J. Appl. Polym. Sci., 126, 298 (2012)
  18. Liaw DJ, Fan CL, Lin CC, Wang KL, J. Appl. Polym. Sci., 92(4), 2486 (2004)
  19. Yang CY, Hsu SLC, Chen JS, J. Appl. Polym. Sci., 98(5), 2064 (2005)
  20. Kim SU, Lee C, Sundar S, Jang WB, Yang SJ, Han H, J. Polym. Sci. B: Polym. Phys., 42(23), 4303 (2004)
  21. Ree M, Shin TJ, Kim SI, Woo SH, Yoon DY, Polymer, 39(12), 2521 (1998)
  22. Park JU, Cho S, Cho KS, Ahn KH, Lee SJ, Lee SJ, Korea-Aust. Rheol. J., 17(2), 41 (2005)
  23. Yang CP, Su YY, Chen YC, J. Appl. Polym. Sci., 102(5), 4101 (2006)
  24. Lee C, Iyer P, Han HS, J. Polym. Sci. B: Polym. Phys., 42(12), 2202 (2004)
  25. Hasegawa M, Horii S, Polym. J., 39, 610 (2007)
  26. Liaw DJ, Chen WH, Polym. Degrad. Stabil., 91, 1731 (2006)
  27. Kurita K, Suzuki Y, Enari T, Ishii S, Nishimura SI, Macromolecules, 28(6), 1801 (1995)
  28. Zhubanov KA, Abil’din TS, Bizhanova NB, Zhubanov BA, Kravtsova VD, Russ. J. Appl. Chem., 76, 1304 (2003)
  29. Hasegawa M, Koseki K, High Perform. Polym., 18, 697 (2006)
  30. Hasegawa M, Sakamoto Y, Tanaka Y, Kobayashi Y, Eur. Polym. J., 46, 1510 (2010)
  31. Pavia DL, Lampman GM, Kriz GS, Introduction to Spectroscopy, Hartcourt, Washington D.C. (2001)
  32. Yang SY, Park CE, Jung MS, Polymer, 44(11), 3243 (2003)
  33. Choi IH, Chang JH, Polym.(Korea), 34(5), 480 (2010)
  34. Fan J, Hu S, Yue CY, Polym. Int., 52, 15 (2003)
  35. Sasaki T, Moriuchi H, Yano S, Yokota R, Polymer, 46(18), 6968 (2005)
  36. Lee JY, Jang J, Polym. Bull., 38(4), 447 (1997)
  37. Tyan HL, Liu YC, Wei KH, Chem. Mater., 11, 1942 (1999)
  38. Matsui S, Sato H, Nakagawa T, J. Membr. Sci., 141(1), 31 (1998)
  39. Jarus D, Hiltner A, Baer E, Polymer, 43(8), 2401 (2002)
  40. Chen YY, Yang CP, Hsiao SH, Eur. Polym. J., 42, 1705 (2006)
  41. Liu JG, Nakamura Y, Shibasaki Y, Ando S, Ueda M, Macromolecules, 40(13), 4614 (2007)
  42. Oh MC, Zhang H, Szep A, Chuyanov V, Steier WH, Zhang C, Dalton LR, Erling H, Tsap B, Fetterman HR, Appl. Phys. Lett., 76, 3525 (2000)
  43. Hasegawa M, Horie K, Prog. Polym. Sci., 26, 259 (2001)