The morphology and the tensile properties of unreinforced and short carbon fibre (SCF) reinforced Nylon 6/multiwalled carbon nanotube (MWCNT)-cdmposites are investigated. The morphology analysis shows that MWCNT and SCF are randomly oriented in the composites. Furthermore, the SCF fail due to fibre pull-out, while the MWCNT fail due to fracture. Young's modulus and tensile strength of SCF reinforced Nylon 6 and Nylon 6/MWCNT-composites increase with increasing total filler volume content. Replacing SCF by MWCNT further enhances Young's modulus and the tensile strength. An additive modelling approach leads to better results at low MWCNT-volume contents, while at higher MWCNT loadings a multiplicative modelling approach results in a better approximation of the experimental data. Thus the SCF reinforced Nylon 6/MWCNT-composites behave at low MWCNT-volume contents like a polymer composite containing two different types of fillers, while at higher MWCNT loadings a behaviour of a short fibre reinforced nanocomposite is observed. (C) 2014 Elsevier Ltd. All rights reserved.