Bentonite clay was used as a reinforcing and compatibilizing filler for natural rubber/polystyrene (NR/PS) blend via latex blending process. The reinforcing and compatibilizing performance of bentonite clay in the NR/PS blends were evaluated. The improvement of the mechanical properties of NR/PS blends with the weight ratios of 90/10, 80/20, and 70/30 was found with the addition of 3 and 5 parts per hundred rubber (phr) clay. The characterization by using Fourier transform infrared spectroscopy and X-ray diffraction (XRD) gave the evidence that the silicate layer was intercalated by NR and PS molecular chains. The morphology of tensile fracture surface by scanning electron microscope showed the separated phase boundaries of PS and NR blend and gradual disappearance with the bentonite content. This could be implied that the bentonite contributes to the compatibilization between PS and NR. The compatibilization action of the bentonite clay was also reflected by the shift of glass transition temperature (T-g) of NR to higher temperatures than those of the blends. These results suggested that the tensile and tear properties of the blends were controlled by compatibility between NR and PS. The most enhanced properties of blends were found with the addition of 3 phr bentonite clay. POLYM. ENG. SCI., 54:1436-1443, 2014. (c) 2013 Society of Plastics Engineers