Solid-State Electronics, Vol.69, 27-30, 2012
ZnO thin-film transistors with a polymeric gate insulator built on a polyethersulfone substrate
Zinc oxide (ZnO) thin-film transistors (TFTs) with a cross-linked poly(vinyl alcohol) (c-PVA) insulator are fabricated on a polyethersulfone substrate. The ZnO film, formed by atomic layer deposition, shows a polycrystalline hexagonal structure with a band gap energy of about 3.37 eV. The fabricated ZnO TFT exhibits a field-effect mobility of 0.38 cm(2)/Vs and a threshold voltage of 0.2 V. The hysteresis of the device is mainly caused by trapped electrons at the c-PVA/ZnO interface, whereas the positive threshold voltage shift occurs as a consequence of constant positive gate bias stress after 5000 s due to an electron injection from the ZnO film into the c-PVA insulator. (c) 2011 Elsevier Ltd. All rights reserved.
Keywords:Zinc oxide;Thin-film transistor;Atomic layer deposition (ALD);Plastic substrate;Polymeric insulator