Solar Energy, Vol.79, No.5, 513-522, 2005
Solar radiation calculation methodology for building exterior surfaces
The present article shows a new methodology of calculation of the direct, diffuse and reflected incident solar radiation, in all type of surfaces, either in open urban environments or inside buildings. This methodology is applicable in problems related. to solar access (space heating in buildings, shadowing of open spaces), solar gains (space cooling in buildings), and daylighting. Solar radiation is the most important contribution to the surface and volumetric energy balance during the daytime. Particularly, solar radiation is the main contributor to heat gains in buildings, especially in residential buildings, where internal gains are very low. Utilization of daylight in buildings may result in significant savings in electricity consumption for lighting while creating a higher quality indoor environment. Additional energy savings may also be realized during cooling season, when reduction of internal heat gains due to electric lighting results in a corresponding reduction of cooling energy consumption. The analysis of the existing calculation methods and proposed in the scientific bibliography for the calculation of the solar radiation in problems of solar access in winter, solar gains in summer, and daylighting, takes us to the necessity of outlining a new and complete methodology. This new methodology is applicable to all these problems with a great accuracy and calculation speed. (c) 2005 Elsevier Ltd. All rights reserved.