Adsorption of CH4, C2H6 and C2H4, the feed and main products of oxidative coupling process of methane (OCM) has been studied on silicoalumina-phosphate molecular sieve (SAPO-34) in mild conditions. The experiments were conducted in a batch system based on volumetric adsorption measurement technique for determination equilibrium adsorption capacity in the absolute pressure range of 100-1000 kPa and at the isothermal temperatures of 303, 313 and 323 K. Various isotherm equations were fitted on the adsorption equilibrium data and the model parameters were predicted as a function of temperature. Isosteric heats of adsorption were determined using Clausius.Clapeyron equation at different surface coverage. Maximum capacity of SAPO-34 was observed at 303 K and 880-900 kPa equilibrium pressure with 1.25, 2.02 and 4.67 mmol/g adsorbed amount for methane, ethane and ethylene adsorption, respectively. The adsorption selectivity of ethane and ethylene against methane were determined and the appropriate potential of SAPO-34 was observed for separation of OCM products from methane. The isotherm models and enthalpy of adsorption can be efficiently used for the simulation of the adsorption process constructed at the downstream of the OCM process for separation of ethane and ethylene from methane.