화학공학소재연구정보센터
홈 로그인 로그아웃 연락처 사이트맵
Polymer(Korea), Vol.39, No.1, 46-55, January, 2015
Export Citation
염기 처리 대마 섬유로 강화된 셀룰로오스 충전 에폭시 하이브리드 복합재의 기계적 물성
Mechanical Properties of Cellulose-filled Epoxy Hybrid Composites Reinforced with Alkali-treated Hemp Fiber
P. Anand, and V. Anbumalar1, †
  • Mechanical Engineering, Vickram College of Engineering, Sivaganaga - 630561, Tamilnadu, India
  • 1Mechanical Engineering, Velammal College of Engineering & Technology, Viraganoor, Madurai - 625009, Tamilnadu, India
E-mail:
There is a limit for deforestation in order to keep the environmental cycle undisturbed. The heart of the paper is to replace the wood to a maximum extent to obtain a sustainable environment. This research aims at new natural composites in which treated hemp fiber used as reinforcement, synthetic cellulose used as particulate to improve the adhesion between matrix - fiber interface and Epoxy LY556 acted as matrix fabricated by hand layup technique. The density, water absorption, tensile properties, impact strength, hardness, flexural properties and compressive properties have been evaluated under ASTM standards and compare the results with existing materials such as wood, aluminium, etc., The composite hemp fiber reinforced polymer (HFRP) could be exploited as an effective replacement for wood and it would be suitable for automotive applications by comparing results.
Keywords:biodegradable polymers;mechanical properties;treated hemp fiber;hybrid green composites.
  1. Ku H, Wang H, Pattarachaiyakoop N, Trada M, Compos. Part B-Eng., 42, 856 (2011)
  2. Groover MP, Fundamental of Modern Manufacturing, 2nd Ed., 111 River Street, Hoboken (NJ), John Wiley & Sons, Inc (2004)
  3. Malkapuram R, Kumar V, Yuvraj SN, J. Reinf. Plast. Compos., 28, 1169 (2008)
  4. Saheb DN, Jog JP, Adv. Polym. Technol., 18(4), 351 (1999)
  5. Li X, Tabil LG, Panigrahi S, Crerar WJ, Technical Meeting AGM Edmonton, CSBE06161, Canadian Society of Biosystems Engineering (2006)
  6. Wambua P, Ivens J, Verpoest I, Compos. Sci. Tech., 63, 1259 (2003)
  7. Ahmad I, Baharum A, Abdullah I, J. Reinf. Plast. Compos., 25, 957 (2006)
  8. Venkateshwaran N, Elayaperumal A, Sathiya GK, Compos. Part B-Eng., 43, 793 (2012)
  9. Jindal UC, J. Compos. Mater., 20, 19 (1986)
  10. Vardarajulu A, Devi LG, Rao GB, Reddy RLN, J. Reinf. Plast. Compos., 22, 1029 (2003)
  11. Cao Y, Wu YQ, J. Central South University of Technology, 15, 564 (2008)
  12. Varma DS, Varma M, Varma IK, J. Reinf. Plast. Compos., 4, 419 (1985)
  13. Rout J, Misra M, Mohanty AK, Nayak SK, Tripathy SS, J. Reinf. Plast. Compos., 22, 1083 (2003)
  14. Paramasivam T, Abdul Kalam APJ, Fiber Sci. Technol., 7, 85 (1974)
  15. Kalaprasad G, Joseph K, Thomas S, Pavithran C, J. Mater. Sci., 32(16), 4261 (1997)
  16. Bai SL, Li RKY, Wu LCM, Zeng HM, Mai YW, J. Mater. Sci. Lett., 17(21), 1805 (1998)
  17. Kuruvilla J, Dias TFR, Beena J, Sabu T, de Hecker CL, Revista Brasileira de Engenharia Agricola Ambiental, 3, 367 (1999)
  18. Pothan LA, George J, Thomas S, Compos. Interfaces, 9(4), 335 (2002)
  19. Sapuan SM, Leenie A, Harimi M, Beng YK, Mater. Design, 27, 689 (2006)
  20. Venkateshwaran N, Elayaperumal A, J. Reinf. Plast. Compos., 29, 2387 (2010)
  21. Venkateshwaran N, Elayaperumal A, Jagadesshwaran MS, “Effect of Fiber Length and Volume Fraction on Mechanical Properties of Natural Fiber Composites”, in Proceeding of APM-2010 Conference, CIPET, Bhubaneswar, India, p. 323, February (2010)
  22. Sreekalaa MS, George J, Kumaran MG, Thomas S, Compos. Sci. Technol., 62, 339 (2002)
  23. Mishra S, Mohanty AK, Drzal LT, Misra M, Parijac S, Nayak SK, Compos. Sci. Technol., 63, 1377 (2003)
  24. Maya J, Sabu T, Varghese KT, Compos. Sci. Technol., 64, 955 (2004)
  25. Amirhossein E, J. Appl. Sci., 7, 3943 (2007)
  26. Velmurugan R, Manikandan V, Compos. Part A-Appl. Sci. Manuf., 38, 2216 (2007)
  27. Thiruchitrambalam M, Alavudeen A, Athijayamani A, Venkateshwaran N, Elayaperumal A, Mater. Phys. Mech., 8, 165 (2009)
  28. Jarukumjorn K, Nitinnat S, Compos. Part B-Eng., 40, 623 (2009)
  29. John K, Naidu SV, J. Reinf. Plast. Compos., 23, 1601 (2004)
  30. Karam GN, J. Compos. Sci. Technol. Res., 16, 154 (1994)
  31. Corradini E, Morais LC, Rosa MF, Mazzetto SE, Mattoso LH, Agnelli JAM, Macromol. Symp., 245-246, 558 (2006)
  32. Mohanty AK, Misra M, Drzal LT, Compos. Interfaces, 8(5), 313 (2001)
  33. Agarwal R, Saxena NS, Sharma KB, Thomas S, Sreekala MS, Mater. Sci. Eng. A Struct. Mater., 277, 77 (2000)
  34. Katz J, U.S. Patent 4,060,386 (1977)
  35. Rout J, Tripathy SS, Nayak SK, Misra M, Mohanty AK, J. Appl. Polym. Sci., 79, 1169 (2000)
  36. Rout J, Misra M, Tripathy SS, Nayak SK, Mohanty AK, Compos. Sci. Technol., 61, 1303 (2001)
  37. Shukla SR, Pai RS, Bioresour. Technol., 96(13), 1430 (2005)
  38. Ramnath BV, Kohan SJ, Raja RN, Mater. Design, 51, 357 (2013)
  39. ASTM standards: D 638 “Test Method for Tensile Properties of Plastics. ASTM book of standards, vol. 08.01.
  40. ASTM standards: D 695 “Test Method for Compressive Properties of Rigid Plastics. ASTM book of standards, vol 08.01.
  41. ASTM standards: D 790 “Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials. ASTM book of standards, vol. 08.01.
  42. ASTM standards: D 256 “Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics. ASTM book of standards, vol. 08.01.
  43. ASTM standards: D 2240 “Test Method for Hardness of Rigid Plastics. ASTM book of standards, vol. 08.01.
  44. ASTM standards: D 570-98 “Test Methods for Water Absorption of Plastics. ASTM book of standards, vol. 08.01.
  45. Febrianto F, Setyawati D, Karina M, Bakar BS, Hadi YS, J. Biol. Sci., 6, 337 (2006)
  46. Ahmed KS, Vijayarangan S, J. Mater. Process. Technol., 207, 330 (2008)
  47. Alexandre G, Takanori M, Koichi G, Junji O, Compos. Part A-Appl. Sci. Manuf., 38, 1811 (2007)
  48. Franco PH, Gonzalez AV, Cervantes UM, Compos. Part B-Eng., 28, 331 (1997)
  49. Cao Y, Shibata S, Fukumoto I, Compos. Part A-Appl. Sci. Manuf., 37, 423 (2006)
  50. Franco PJH, Gonalez AV, Compos. Part B-Eng., 36, 597 (2005)
  51. Xue Y, Veazie DR, Glinsey C, Horstmeyer MF, Rowell RM, Compos. Part B-Eng., 38, 152 (2007)
  52. Singh VK, Gope PC, Sakshi C, Singh BD, J. Mater. Environ. Sci., 3, 185 (2012)
  53. Saheb DN, Jog JP, Adv. Polym. Technol., 18(4), 351 (1999)
  54. Maleque MA, Belal FY, Sapuan SM, Arabian J. Sci. Eng., 32, 359 (2007)
  55. Roe PJ, Ansell MP, J. Mater. Sci., 20, 4015 (1985)
  56. Mylsamy K, Rajendran I, Mater. Design, 32, 3076 (2011)