화학공학소재연구정보센터
Korean Journal of Materials Research, Vol.19, No.10, 538-543, October, 2009
다공성 원료를 사용한 석고보드의 흡습 특성
Hygroscopic Characteristic of Gypsum Boards Using Porous Materials
E-mail:
Active clays, Diatomite, bentonite and zeolite were used as porous materials for fabricating hygroscopic gypsum boards. Pohang active clay and Cheolwon diatomite showed excellent characteristics of moisture adsorption and desorption. These characteristics were caused by higher surface area and pore volume of porous materials. Moisture adsorption content of gypsum board with 10% active clay(P1) was 62.0 g/m2, and moisture desorption content was 50.2 g/m2. Moisture adsorption content of gypsum board with 10% diatomite(P) was 59.5 g/m2, and moisture desorption content was 49.0 g/m2. Moisture adsorption contents of gypsum boards with porous materials were higher than that moisture desorption contents of gypsum board without porous materials. Correlation coefficient between surface area and moisture adsorption content of gypsum boards was 0.98. Also, correlation coefficient between surface area and moisture desorption content of gypsum boards was 0.97. Moisture adsorption and desorption contents were influenced by surface area and pore volume of the gypsum boards, and surface area had a larger effect on moisture adsorption and desorption.
  1. Sim SH, Kim YS, J. Kor. Env. Hlth., 32(4), 275 (2006)
  2. Pang SK, Cho WJ, Sohn JY, J. Kor. Air conditioning and refrigeration engineering, 18(6), 486 (2006)
  3. Choi YJ, Shim HS, Shin HC, J. Kor. Housing Association, 18(4), 59 (2007)
  4. Noh JH, Ko SM, J. Miner. Kor., 17(2), 135 (2004)
  5. Noh JH, J. Miner. Soc. Kor., 19(4), 311 (2006)
  6. Barrer RM, Hydrothermal chemistry of zeolites, p. 1, R. M. Barrer, Academic Press, London and New York (1982). (1982)