화학공학소재연구정보센터
홈 로그인 로그아웃 연락처 사이트맵
Journal of Industrial and Engineering Chemistry, Vol.21, 1020-1028, January, 2015
DOI10.1016/j.jiec.2014.05.011  Export Citation
Mass transfer resistance of simultaneous extraction and stripping of mercury(II) from petroleum produced water via HFSLM
Srestha Chaturabul, Thanaporn Wannachod, Natchanun Leepipatpiboon1, Ura Pancharoen†, and Soorathep Kheawhom†
  • Department of Chemical Engineering, Faculty of Engineering, Chulalongkorn University, Patumwan, Bangkok 10330, Thailand
  • 1Chromatography and Separation Research Unit, Department of Chemistry, Faculty of Science, Chulalongkorn University, Patumwan, Bangkok 10330, Thailand
E-mail:,
The simultaneous extraction and stripping of mercury(II) from petroleum produced water via hollow fiber supported liquid membrane (HFSLM) was examined. Optimum conditions for extraction and stripping were pH 1 in feed solution, 5% (v/v) Aliquat 336 in the liquidmembrane and 0.05 Mthiourea in the stripping solution. Percentages obtained for extraction and stripping of mercury(II) were 96.8% and 92.5% which were below the legislation limit of 5 ppb. The overall mass transfer resistance (R) was 7.286 × 10^(2) s/cm. Results showed that themass transfer model fitted in well with the experimental data.
Keywords:Mercury(II);Extraction;Mass transfer;Petroleum produced water;HFSLM
  1. Chester DR, Groundwater Contamination, Contamination Sources and Hydrology, vol. 1, Technomic Publishing Company, Inc., Lancaster, Pennsylvania, 2000.
  2. Neff JM, Rabalais NN, Boesch DF, in: Boesch DF, Rabalais NN (Eds.), Long-Term Environmental Effects of Offshore Oil and Gas Development, Elsevier Applied Science Publishers, London, 1987, p. 149.
  3. Pairoj-Boriboon S, Kositrat N, In-na Y, Chongprasith P, Utoomprurkporn W, Praekulvanich E, Sangwichit P, United Nations Environment Programme (UNEP) Chemicals, United Nations Environment Programme(UNEP), Geneva, Switzerland, 2001.
  4. Gallup DL, Strong JB, Removal of mercury and arsenic from produced water, Chevron Corporation, 2007, 1-9.
  5. Corvini G, Stiltner J, Clark K, UOP LLC, Keith Clark, 2007 3 pp.
  6. Chakrabarty K, Saha P, Ghoshal AK, J. Membr. Sci., 346(1), 37 (2010)
  7. van der Vaart R, Akkerhuis J, Feron P, Jansen B, J. Membr. Sci., 187(1-2), 151 (2001)
  8. Ministry of Industry, Thailand Regulatory Discharge Standards 2, Ministry of Industry, Thailand, 1996.
  9. Ramanaiah GV, Talanta, 46, 533 (1998)
  10. Lu JY, Schroeder WH, Talanta, 49, 15 (1999)
  11. Wang QH, Chang XJ, Li DD, Hu Z, Li RJ, He Q, J. Hazard. Mater., 186(2-3), 1076 (2011)
  12. Chai X, Chang X, Hu Z, He Q, Tu Z, Li Z, Talanta, 82, 1791 (2010)
  13. Sangtumrong S, Ramakul P, Satayaprasert C, Pancharoen U, Lothongkum AW, J. Ind. Eng. Chem., 13(5), 751 (2007)
  14. Inbaraj BS, Wang JS, Lu JF, Siao FY, Chen BH, Bioresour. Technol., 100(1), 200 (2009)
  15. Coelhoso IM, Cardoso MM, Viegas RMC, Crespo JPSG, Sep. Purif. Technol., 19(3), 183 (2000)
  16. Roman MFS, Bringas E, Ibanez R, Ortiz I, J. Chem. Technol. Biotechnol., 85(1), 2 (2010)
  17. Kocherginsky NM, Yang Q, Seelam L, Sep. Purif. Technol., 53(2), 171 (2007)
  18. Pancharoen U, Lothongkum AW, Chaturabul S, in: Mohamed El-Amin (Ed.), Mass Transfer in Multiphase Systems and its Applications, InTech, India, 2011, p. 499.
  19. Francis T, Rao TP, Reddy MLP, Hydrometallurgy, 57, 263 (2000)
  20. Pancharoen U, Poonkum W, Lothongkum AW, J. Alloy. Compd., 482, 328 (2009)
  21. Uedee E, Ramakul P, Pancharoen U, Lothongkum AW, Korean J. Chem. Eng., 25(6), 1486 (2008)
  22. Pancharoen J, Somboonpanya S, Chaturabul S, Lothongkum AW, J. Alloy. Compd., 489, 72 (2010)
  23. Chakrabarty K, Saha P, Ghoshal AK, J. Membr. Sci., 350(1-2), 395 (2010)
  24. Shamsipur M, Hashemi OR, Lippolis V, J. Membr. Sci., 282(1-2), 322 (2006)
  25. Jabbari A, Esmaeili M, Shamsipur M, Sep. Purif. Technol., 24(1-2), 139 (2001)
  26. Shaik AB, Chakrabarty K, Saha P, Ghoshal AK, Ind. Eng. Chem. Res., 49(6), 2889 (2010)
  27. Fontas C, Hidalgo M, Salvado V, Antico E, Anal. Chim. Acta, 547, 255 (2005)
  28. Fabrega FM, Mansur MB, Hydrometallurgy, 87, 83 (2007)
  29. Miller JD, Fuerstenau MC, Metall. Mater. Trans. B-Proc. Metall. Mater. Proc. Sci., 1, 2531 (1970)
  30. Ho WSW, Wang B, Ind. Eng. Chem. Res., 41(3), 381 (2002)
  31. Tang Y, Liu W, Wan J, Wang Y, Yang X, Process Biochem., 48, 1980 (2013)
  32. Wickramasinghe SR, Semmens MJ, Cussler EL, J. Membr. Sci., 69, 235 (1992)
  33. Yang MC, Cussler EL, AIChE J., 32, 1910 (1986)
  34. Yang Q, Kocherginsky NM, J. Membr. Sci., 297(1-2), 121 (2007)
  35. Baudot A, Floury J, Smorenburg HE, AIChE J., 47(8), 1780 (2001)
  36. Suren S, Pancharoen U, Thamphiphit N, Leepipatpiboon N, J. Membr. Sci., 448, 23 (2013)
  37. Breembroek GRM, van Straalen A, Witkamp GJ, van Rosmalen GM, J. Membr. Sci., 146(2), 185 (1998)
  38. Suren S, Pancharoen U, Kheawhom S, J. Ind. Eng. Chem., 20(4), 2584 (2014)
  39. Chakrabarty K, Krishna KV, Saha P, Ghoshal AK, J. Membr. Sci., 330(1-2), 135 (2009)
  40. Lothongkum AW, Suren S, Chaturabul S, Thamphiphit N, Pancharoen U, J. Membr. Sci., 369(1-2), 350 (2011)
  41. Wannachod T, Leepipatpiboon N, Pancharoen U, Nootong K, J. Ind. Eng. Chem., hhttp://dx.doi.org/10.1016/j.jiec.2014.01.014i.
  42. Wu D, Zhang Q, Bao B, Hydrometallurgy, 88, 210 (2007)
  43. Yang Q, Kocherginsky NM, J. Membr. Sci., 286(1-2), 301 (2006)