The biocompatibility of currently used coronary artery stent is still far from perfect, which closely related to insufficient endothelialization and thrombus formation. In this study, heparin, fibronectin and VEGF were immobilized on Ti surface to construct a multifunctional microenvironment with favorable properties to inhibit thrombosis formation and promote endothelialization simultaneously. The microenvironment on Ti surface was characterized in detail and demonstrated that the Hep/Fn/VEGF biofunctional coating was constructed successfully on Ti surface. The influence of surface properties such as chemical composition, roughness, hydrophilicity, and binding density of biomolecules on the performances of hemocompatibility and cytocompatibility was evaluated and discussed. Modified surface significantly enhanced the AT III binding density and prolonged the clotting time. In vitro platelet adhesion and activation assays further proved that the modified surface presented favorable anticoagulant property. In addition, the proliferation of endothelial progenitor cells (EPCs) and endothelial cells (ECs) on the Hep/Fn/VEGF biofunctional coating was significantly promoted. In conclusion, the Hep/Fn/VEGF biofunctional coating was successfully constructed with desirable anticoagulant and endothelialization supporting properties. This work may provide a promising approach for biofunctional surface modification of coronary artery stent to acquire a desired multifunctional microenvironment. (C) 2014 Elsevier B.V. All rights reserved.