Impedance spectroscopy was used to measure the properties of the gold electrode in 0.5 M H2SO4 solution in the double-layer region (-0.25 to 1.05 V vs. sodium chloride saturated calomel electrode (SSCE)) and the region of oxide monolayer formation (1.05-1.4 V vs. SSCE). The dependence of the capacitance on potential was analysed. In both regions equivalent circuits composed of a resistor corresponding to the resistivity of the solution and a capacitor were proposed. It was found that in the double-layer region the capacitance reflected the properties of the pure gold electrode, whereas in the oxide region it depended on the coverage of the surface, corresponding partially to pure gold, MOH dipoles, oxide or a reconstructed gold surface. The improvements made by introducing a constant phase element instead of the capacitor and adding a parallel resistor in the oxide region were analysed. The roughness of the gold electrode was also estimated. The results obtained by impedance measurements were complemented by voltammetric studies to clarify the process, to confirm the measured values and to explain the meanings of the calculated parameters.