A multichannel reformer integrated with catalytic combustion was investigated for methane steam reforming to produce hydrogen. In this system, the main portion of the required heat was supplied by methane oxidation in the catalytic combustor located on two sides of the reformer. In the compact multichannel reactor, the methane conversion rate is high enough compared to the equilibrium values at different temperatures. The performance of the multichannel reformer was investigated under various operating conditions, such as the reformer temperature and the feed stream ratios in both the reformer and the catalytic combustor. The best feed flow rate ratio of reforming to combustion ranged from 1.3 to 1.5, with >95% methane conversion. It is anticipated that this multichannel reformer can generate enough hydrogen for a 30-W fuel cell system, due to its small volume.