A metal hydride tank has been developed with the aim of recovering the reaction heat of a metal hydride for the Totalized Hydrogen Energy Utilization System application. The metal hydride tank, which had the same geometrical configuration as one previously evaluated at SRNL, was fabricate with a different composition of the metal hydride alloy for operation below 1.0 MPa (Gauge). The hydrogen mass flow data from hydrogen production by renewable energy (solar power) and the fuel cell operation, which were obtained at SRNL, were used for the testing at AIST. The relatively large heat leak from the tank support of the metal hydride tank at SRNL was confirmed, and thus the tank support was replaced in this work. Furthermore, a vacuum thermal insulator was developed and applied to the metal hydride tank. This resulted in overall tank size reduction without reducing the thermal insulation performance. Copyright (C) 2015, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.