The asymmetrical sulfur analog of 3,4-ethylenedioxythiophene (EDOT), thieno[3,4-b]-1,4-oxathiane (EOTT), was synthesized, and its electropolymerization was comparatively investigated by employing different solvent-electrolyte systems (room temperature ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate (BmimPF(6)), CH2Cl2-Bu4NPF6, and CH2Cl2-BmimPF(6)). Further, the effect of solvents and supporting electrolytes on the structure, morphology, electrochemical, electronic, and optical properties and electrochromic performance of the obtained poly(thieno[3,4-b]-1,4-oxathiane) (PEOTT) films were minutely studied. PEOTT film with a band gap (Eg) of about 1.6 eV could be facilely electrodeposited in all the solvent-electrolytes and displayed excellent electroactivity, outstanding redox stability in a wide potential window, and improved thermal stability. Cyclic voltammetry showed that EOTT could be electropolymerized at a lower oxidation potential in BmimPF(6) (similar to 1.0 V vs Ag/AgCl) due to several advantanges of RTIL BmimPF6 itself, such as high intrinsic conductivity and mild chemical conditions, etc., and the resulting PEOTT film exhibited compact morphology with better electroactivity and stability and higher electrical conductivity. On the other hand, PEOTT films from all the sovent-electrolytes also showed the electrochromic nature by color changing from gray blue to green, and further kinetic studies revealed that PEOTT had decent contrast ratios (36%), higher coloration efficiencies (212 cm(2)/C in BmimPF6), low switching voltages, moderate response time (1.2 s), excellent stability, and color persistence. From these results, PEOTT provides more plentiful electrochromic colors and holds promise for display applications.