Nickel and cobalt acid leaching from a low-grade South African saprolitic laterite using sulphuric acid was studied. Ore characterisation was performed by XRD and XRF. Batch agitation leaching tests were conducted at atmospheric pressure investigating main parameters: particle size and percent solids at 25 degrees C and 90 degrees C. Ore characterisation showed that the ore is a saprolitic laterite with nickel present in lizardite. Leaching tests showed that nickel and cobalt could be leached from the ore at atmospheric pressure. Nickel was found to be more leachable from the coarser -106 + 75 mu m fraction, with 98% Ni being extracted at 90 degrees C after 480 min. Cobalt was not favoured by variation in particle size and increased percent solids. Increasing ore percent solids improved nickel extraction at 25 degrees C however at 90 degrees C extraction decreased due to a diffusion layer build-up as a result of amorphous colloidal silica. The co-dissolution of magnesium and iron was elucidated. Nickel leaching data at increased temperature and percent solids fit the shrinking core model equation, k(d)t = 1-2/3x - (1 - x)(2/3) showing that nickel leaching reaction was diffusion controlled under the set conditions. (C) 2013 Elsevier Ltd. All rights reserved.