A study on mechanical properties and microstructure of tetragonal zirconia-based composites

Dong-Jin Lee; Heung-Soap Choi; Fan-Long Jin; Soo-Jin Park

Journal of Industrial and Engineering Chemistry, Vol.27, 322-328, July, 2015

DOI10.1016/j.jiec.2015.01.008 Export Citation

A study on mechanical properties and microstructure of tetragonal zirconia-based composites

Dong-Jin Lee¹, Heung-Soap Choi², Fan-Long Jin^{3, 4}, and Soo-Jin Park^{4, †}

¹Nano Technology Inc., 289-20 Daehwa-dong, Daedeok-gu, Daejon 306-801, Republic of Korea
²Department of Mechanical and Design Engineering, Hongik University, Sejong 339-701, Republic of Korea
³Department of Polymer Materials, Jilin Institute of Chemical Technology, Jilin City 132022, People’s Republic of China, Korea
⁴Department of Chemistry, Inha University, Nam-gu, Incheon 402-751, South Korea

E-mail:

The relative density, bending strength, fracture toughness, and fracture surface microstructure of tetragonal zirconia (t-ZrO2)-based composites prepared using magnetic pulsed compaction were investigated. The relative density and bending strength of the composites increased with increasing sintering temperature, whereas the fracture toughness increased with the addition of monoclinic zirconia (m-ZrO2) and Al2O3 particles. Scanning electron microscopy images indicate that the m-ZrO2 particles in the t-ZrO2 matrix induce residual stress and micro-cracking. Al2O3 particles act as barriers to crack growth in t-ZrO2/m-ZrO2/Al2O3 composites.

Keywords:ZrO2;Composites;Relative density;Bending strength;Fracture toughness

[References]

Kong L, Zhu, Bi Q, Qiao Z, Yang J, Liu W, Ceram. Int., 40, 10787 (2014)
Yang LP, Shan S, Wei X, Liu X, Yang H, Shen X, Ceram. Int., 40, 9055 (2014)
Kong L, Zhu S, Qiao Z, Yang J, Bi Q, Liu W, Tribol. Int., 78, 7 (2014)
Zhang W, Glasser FP, J. Eur. Ceram. Soc., 13, 25 (1994)
Ouyang JH, Sasaki S, Umeda K, Wear, 249, 440 (2001)
Sarkar SK, Lee BT, Ceram. Int., 36, 1971 (2010)
Zhou Z, Wang Z, Yi Y, Jiang S, Wang G, Chen J, Compos. Pt. B, 42, 1271 (2011)
Liang B, Zhang G, Liao H, Coddet C, Ding C, Surf. Coat. Technol., 203, 3235 (2009)
Mukhopadhyay A, Basu B, Bakshi SD, Mishra SK, Int. J. Refract. Metals Hard Mater., 25, 179 (2007)
Huang SG, Vanmeensel K, Biest OV, Vleugels J, J. Eur. Ceram. Soc., 27, 3269 (2007)
Pian X, Fan B, Chen H, Zhao B, Zhang X, Zhang R, Ceram. Int., 40, 10483 (2014)
Wang H, Huang H, Liang J, Liu J, Ceram. Int., 40, 3995 (2014)
Mesa MC, Oliete PB, Pastor JY, Martın A, Lorca JL, J. Eur. Ceram. Soc., 34, 2081 (2014)
Park SJ, Jin FL, Lee JR, Macromol. Chem. Phys., 205, 2048 (2004)
Hu HL, Zeng YP, Xia YF, Yao DX, Zuo KH, Gunster J, Heinrich JG, Ceram. Int., 40, 7579 (2014)
Dong W, Liu HC, Park SJ, Jin FL, J. Ind. Eng. Chem., 20(4), 1220 (2014)
Chen L, Wang Y, Shen H, Rao J, Zhou Y, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 590, 346 (2014)
Jiang W, Jin FL, Park SJ, J. Ind. Eng. Chem., 18(2), 594 (2012)
Smirnov A, Bartolome JF, Ceram. Int., 40, 1829 (2014)
Jin FL, Rhee KY, Park SJ, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 435-436, 429 (2006)
Hussainova I, Voltsihhin N, Cura E, Hannula SP, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 597, 75 (2014)
Park SJ, Jin FL, Lee JR, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 374, 109 (2004)
Yao YW, Zhao MM, Zhao CM, Zhang HJ, Electrochim. Acta, 117, 453 (2014)
Jin FL, Rhee KY, Park SJ, J. Solid State Chem., 184, 3253 (2011)
Aghazadeh M, Hosseinifard M, Ceram. Int., 39, 4427 (2013)
Jin FL, Ma CJ, Park SJ, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 528, 8517 (2011)
Cubillos GI, Bethencourt M, Olaya JJ, Alfonso JE, Marco JF, Appl. Surf. Sci., 309, 181 (2014)
Park SJ, Jin FL, Shin JS, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 390, 240 (2005)
Atkinson I, Anghel EM, Munteanu C, Voicescu M, Zaharescu M, Ceram. Int., 40, 7337 (2014)
Park SJ, Jin FL, Polym. Degrad. Stabil., 86, 515 (2004)
Park SJ, Jin FL, Lee JR, Shin JS, Eur. Polym. J., 41, 231 (2005)

[Referenced By]

[Related Articles]

[1] Kong L, Zhu, Bi Q, Qiao Z, Yang J, Liu W, Ceram. Int., 40, 10787 (2014)

[2] Yang LP, Shan S, Wei X, Liu X, Yang H, Shen X, Ceram. Int., 40, 9055 (2014)

[3] Kong L, Zhu S, Qiao Z, Yang J, Bi Q, Liu W, Tribol. Int., 78, 7 (2014)

[4] Zhang W, Glasser FP, J. Eur. Ceram. Soc., 13, 25 (1994)

[5] Ouyang JH, Sasaki S, Umeda K, Wear, 249, 440 (2001)

[6] Sarkar SK, Lee BT, Ceram. Int., 36, 1971 (2010)

[7] Zhou Z, Wang Z, Yi Y, Jiang S, Wang G, Chen J, Compos. Pt. B, 42, 1271 (2011)

[8] Liang B, Zhang G, Liao H, Coddet C, Ding C, Surf. Coat. Technol., 203, 3235 (2009)

[9] Mukhopadhyay A, Basu B, Bakshi SD, Mishra SK, Int. J. Refract. Metals Hard Mater., 25, 179 (2007)

[10] Huang SG, Vanmeensel K, Biest OV, Vleugels J, J. Eur. Ceram. Soc., 27, 3269 (2007)

[11] Pian X, Fan B, Chen H, Zhao B, Zhang X, Zhang R, Ceram. Int., 40, 10483 (2014)

[12] Wang H, Huang H, Liang J, Liu J, Ceram. Int., 40, 3995 (2014)

[13] Mesa MC, Oliete PB, Pastor JY, Martın A, Lorca JL, J. Eur. Ceram. Soc., 34, 2081 (2014)

[14] Park SJ, Jin FL, Lee JR, Macromol. Chem. Phys., 205, 2048 (2004)

[15] Hu HL, Zeng YP, Xia YF, Yao DX, Zuo KH, Gunster J, Heinrich JG, Ceram. Int., 40, 7579 (2014)

[16] Dong W, Liu HC, Park SJ, Jin FL, J. Ind. Eng. Chem., 20(4), 1220 (2014)

[17] Chen L, Wang Y, Shen H, Rao J, Zhou Y, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 590, 346 (2014)

[18] Jiang W, Jin FL, Park SJ, J. Ind. Eng. Chem., 18(2), 594 (2012)

[19] Smirnov A, Bartolome JF, Ceram. Int., 40, 1829 (2014)

[20] Jin FL, Rhee KY, Park SJ, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 435-436, 429 (2006)

[21] Hussainova I, Voltsihhin N, Cura E, Hannula SP, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 597, 75 (2014)

[22] Park SJ, Jin FL, Lee JR, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 374, 109 (2004)

[23] Yao YW, Zhao MM, Zhao CM, Zhang HJ, Electrochim. Acta, 117, 453 (2014)

[24] Jin FL, Rhee KY, Park SJ, J. Solid State Chem., 184, 3253 (2011)

[25] Aghazadeh M, Hosseinifard M, Ceram. Int., 39, 4427 (2013)

[26] Jin FL, Ma CJ, Park SJ, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 528, 8517 (2011)

[27] Cubillos GI, Bethencourt M, Olaya JJ, Alfonso JE, Marco JF, Appl. Surf. Sci., 309, 181 (2014)

[28] Park SJ, Jin FL, Shin JS, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 390, 240 (2005)

[29] Atkinson I, Anghel EM, Munteanu C, Voicescu M, Zaharescu M, Ceram. Int., 40, 7337 (2014)

[30] Park SJ, Jin FL, Polym. Degrad. Stabil., 86, 515 (2004)

[31] Park SJ, Jin FL, Lee JR, Shin JS, Eur. Polym. J., 41, 231 (2005)