마찰교반공정을 통한 강재의 개질 영역에서의 미세조직에 미치는 합금원소의 영향

김상혁; 이광진; Sang Hyuk Kim; Kwang Jin Lee; 우기도

Korean Journal of Materials Research, Vol.25, No.8, 370-375, August, 2015

DOI10.3740/MRSK.2015.25.8.370 Export Citation

마찰교반공정을 통한 강재의 개질 영역에서의 미세조직에 미치는 합금원소의 영향

Effect of Alloy Elements on Microstructure of Modified Area via Friction Stir Process in Steel Materials

김상혁, 이광진^{1, †}, ^†

전북대학교 신소재공학부
¹한국생산기술연구원 융복합부품·농기계그룹

Sang Hyuk Kim, Kwang Jin Lee^{1, †}, and 우기도^†

Division of Advanced Materials Engineering, Chonbuk National University, Korea
¹Convergence Components & Agricultural Machinery Group, Korea Institute of Industrial Technology, Korea

E-mail:,

In this study, to confirm the effect of alloying elements on the phase transformation and conditions of the friction stir process, we processed two materials, SS400 and SM45C steels, by a friction stir process (FSP) under various conditions. We analyzed the mechanical properties and microstructure of the friction stir processed zone of SS400 and SM45C steels processed under 400RPM - 100mm/min conditions. We detected no macro (tunnel defect) or micro (void, micro crack) defects in the specimens. The grain refinement in the specimens occurred by dynamic recrystallization and stirring. The microstructure at the friction stir processed zone of the SS400 specimen consisted of an α-phase. On the other hand, the microstructure at the friction stir processed zone of the SM45 specimen consisted of an α-phase, Fe3C and martensite due to a high cooling rate and high carbon content. Furthermore, the hardness and impact absorption energy of the friction stir processed zone were higher than those of base metals. The hardness and impact absorption energy of FSPed SM45C were higher than that of FSPed SS400. Our results confirmed the effect of alloying elements on the phase transformation and mechanical properties of the friction stir processed zone.

Keywords:friction stir process;steel;phase transformation;grain refinement

[References]

Gorockiewicz R, Adamek A, Korecki M, ASM handbook 4A, 389, Dossett J, Totten GE edit., ASM international, USA (2013).
Wei Y, Zurecki Z, Sisson RD, Surf. Coat. Technol., 272, 190 (2015)
Azis SAA, Ahamad NW, Surf. Coat. Technol., 210, 142 (2012)
Jauhari I, Rozali S, Masdek NRN, Hiroyuki O, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 466, 230 (2007)
Wang DZ, Hu QW, Zeng XY, Surf. Coat. Technol., 274, 51 (2015)
Arai T, Shin JK, Matsubayashi H, Ochiai S, Okuda H, Osamura K, Prusseit W, Physica C, 469(15-20), 1472 (2009)
Niu Y, Lu D, Huang L, Zhao J, Zheng X, Chen G, Vacuum, 117, 98 (2015)
Bataev IA, Golkovskii MG, Losinskaya AA, Bataev AA, Popelyukh AI, Hassel T, Golovin DD, Appl. Surf. Sci., 322, 6 (2014)
Adachi S, Ueda N, Adv. Powder Technol., 24(5), 818 (2013)
Toumpis A, Galloway A, Cater S, McPherson N, Mater. Des., 62, 64 (2014)
Esmailzadeh M, Shamanian M, Kermanpur A, Saeid T, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 561, 486 (2013)
Toumpis A, Galloway A, Molter L, Polezhayeva H, Mater. Des., 80, 116 (2015)
Srinivasu R, Rao AS, Reddy GM, Rao KS, Defence Technol., 11(2), 140 (2015)
Li D, Yang X, Cui L, He F, Zhang X, J. Mater. Process. Technol., 222, 391 (2015)
Besel M, Besel Y, Mercado UA, Kakiuchi T, Uematsu Y, Int. J. Fatigue, 77, 1 (2015)
Lee KJ, Kim SH, Park HK, Oh IH, Adv. Mater. Res., 399-401, 273 (2012)

[1] Gorockiewicz R, Adamek A, Korecki M, ASM handbook 4A, 389, Dossett J, Totten GE edit., ASM international, USA (2013).

[2] Wei Y, Zurecki Z, Sisson RD, Surf. Coat. Technol., 272, 190 (2015)

[3] Azis SAA, Ahamad NW, Surf. Coat. Technol., 210, 142 (2012)

[4] Jauhari I, Rozali S, Masdek NRN, Hiroyuki O, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 466, 230 (2007)

[5] Wang DZ, Hu QW, Zeng XY, Surf. Coat. Technol., 274, 51 (2015)

[6] Arai T, Shin JK, Matsubayashi H, Ochiai S, Okuda H, Osamura K, Prusseit W, Physica C, 469(15-20), 1472 (2009)

[7] Niu Y, Lu D, Huang L, Zhao J, Zheng X, Chen G, Vacuum, 117, 98 (2015)

[8] Bataev IA, Golkovskii MG, Losinskaya AA, Bataev AA, Popelyukh AI, Hassel T, Golovin DD, Appl. Surf. Sci., 322, 6 (2014)

[9] Adachi S, Ueda N, Adv. Powder Technol., 24(5), 818 (2013)

[10] Toumpis A, Galloway A, Cater S, McPherson N, Mater. Des., 62, 64 (2014)

[11] Esmailzadeh M, Shamanian M, Kermanpur A, Saeid T, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 561, 486 (2013)

[12] Toumpis A, Galloway A, Molter L, Polezhayeva H, Mater. Des., 80, 116 (2015)

[13] Srinivasu R, Rao AS, Reddy GM, Rao KS, Defence Technol., 11(2), 140 (2015)

[14] Li D, Yang X, Cui L, He F, Zhang X, J. Mater. Process. Technol., 222, 391 (2015)

[15] Besel M, Besel Y, Mercado UA, Kakiuchi T, Uematsu Y, Int. J. Fatigue, 77, 1 (2015)

[16] Lee KJ, Kim SH, Park HK, Oh IH, Adv. Mater. Res., 399-401, 273 (2012)