Viscoelastic behaviour of dehydrated products during rehydration of apple, banana, carrot and potato was examined under uniaxial compression tests. Samples were dehydrated with four different drying methods: conventional, vacuum, freeze and osmotic-freeze drying and after that they were rehydrated in an air dryer at 50 degrees C and 80% air humidity. Compression tests were performed during rehydration for various moisture contents, ranging from 0.01 to 1.5 kg/kg dry basis. The viscoelastic behaviour of dehydrated products during rehydration were examined comparing the values of the four parameters incorporated into the stress-strain model, during rehydration with those of dehydrated products. The four examined parameters: maximum stress, maximum strain, elastic parameter and viscoelastic exponent seem to show a hysteresis phenomenon. It can be concluded that dehydrated product do not keep their viscoelastic behaviour after rehydration due to structural damages that occur during drying. More specifically, freeze dried materials present the highest hysteresis after rehydration, losing their elasticity and becoming more viscous. Osmotic pretreatment seems to help freeze dried materials to keep their elastic nature, probably due to solids gain. Air and vacuum dried materials showed the smallest hysteresis tendency, keeping their viscoelastic characteristics during rehydration close to those of dried materials.