Bioresource Technology, Vol.182, 329-335, 2015
Biogas production from ensiled meadow grass; effect of mechanical pretreatments and rapid determination of substrate biodegradability via physicochemical methods
As the biogas sector is rapidly expanding, there is an increasing need in finding new alternative feedstock to biogas plants. Meadow grass can be a suitable co-substrate and if ensiled it can be supplied to biogas plants continuously throughout the year. Nevertheless, this substrate is quite recalcitrant and therefore efficient pretreatment is needed to permit easy access of microbes to the degradable components. In this study, different mechanical pretreatment methods were applied on ensiled meadow grass to investigate their effect on biomass biodegradability. All the tested pretreatments increased the methane productivity and the increase ranged from 8% to 25%. The best mechanical pretreatment was the usage of two coarse mesh grating plates. Additionally, simple analytical methods were conducted to investigate the possibility of rapidly determining the methane yield of meadow grass. Among the methods, electrical conductivity test showed the most promising calibration statistics (R-2 = 0.68). (C) 2015 Elsevier Ltd. All rights reserved.