화학공학소재연구정보센터
홈 로그인 로그아웃 연락처 사이트맵
Polymer(Korea), Vol.40, No.2, 298-305, March, 2016
DOI10.7317/pk.2016.40.2.298  Export Citation
무색투명 폴리(아미드 이미드) 공중합체의 합성 및 특성
Syntheses and Characterizations of Colorless and Transparent Poly(amide imide) Copolymer
이영도1, 김기수2, 옥영진2, 김무송2, 3, 장진해1, †
  • 1금오공과대학교 고분자공학과
  • 2㈜효성 효성기술원
  • 3서울대학교 재료공학부 신소재공동연구소
Young Do Lee1, Kisoo Kim2, Youngjin OK2, Moosong Kim2, 3, and Jin-Hae Chang1, †
  • 1Department of Polymer Science and Engineering, Kumoh National Institute of Technology, Gumi 39177, Korea
  • 2Polymerization Research Group, R&D Business Labs, Hyosung Corporation, Anyang 14080, Korea
  • 3Research Institute of Advanced Materials, Department of Materials Science and Engineering, Seoul National University, Seoul 08826, Korea
E-mail:
초록
4-nitrobenzoyl chloride와 2,2'-bis(trifluoromethyl)benzidine(TFB)를 이용하여 N,N'-[2,2'-bis(trifluoromethyl)-4,4'-biphenylene]bis(4-aminobenzamide)(TFAB)의 아민 단량체를 합성하였다. 합성된 TFAB와 무수물 단량체인 4,4'-(hexafluoro-isopropylidene) diphthalic anhydride(6FDA) 및 4,4'-biphthalic anhydride(BPA)를 다양한 몰 비로 반응하여 폴리아믹산(polyamic acid, PAA)을 합성한 후 화학적-열적 이미드화 반응을 거쳐 아미드 그룹을 가지는 폴리이미드 공중합체(Co-PI)를 합성하였다. 용액 캐스팅으로 합성된 Co-PI 필름은 유연하고 질긴 성질을 보였다. 합성된 Co-PI는 BPA의 함량 변화에 따라 열적-기계적 성질 및 광학 투명도 등을 조사하였다. Co-PI 필름의 열 팽창 계수(coefficient of thermal expansion, CTE) 값은 BPA의 몰 비가 증가할수록 감소하였지만, 광학 투명성에서는 반대의 결과를 보여주었다.
N,N'-[2,2′-bis(trifluoromethyl)-4,4′-biphenylene]bis(4-aminobenzamide) (TFAB) was synthesized from 4-nitrobenzoyl chloride and 2,2′-bis(trifluoromethyl)benzidine (TFB). The obtained TFAB, 4,4′-(hexafluoroisopropylidene) diphthalic anhydride (6FDA), and 4,4′-biphthalic anhydride (BPA) were used to synthesize polyimide copolymers (Co-PIs) containing amide groups. Flexible and tough Co-PI films were prepared from poly(amic acid) (PAA) through solution-casting using chemical and thermal imidization methods. The thermomechanical properties and optical transparency of the Co-PI films with various BPA monomer contents were investigated. The coefficients of thermal expansions (CTEs) of the Co-PI films were improved linearly with increasing BPA content. However, their optical transparency was found to worsen with increasing BPA content.
Keywords:copoly(amide imide);colorless and transparent polyimide;thermo-mechanical properties;optical transparency
  1. Lim H, Cho WJ, Ha CS, Ando S, Kim YK, Park CH, Lee K, Adv. Mater., 14(18), 1275 (2002)
  2. Lee DH, Shim SH, Choi JS, Yoon KB, Appl. Surf. Sci., 254(15), 4650 (2008)
  3. Yi MH, Polym. Sci. Technol., 14, 580 (2003)
  4. Gustafsson G, Cao Y, Treacy GM, Klavetter F, Colaneri N, Heeger AJ, Nature, 357, 477 (1992)
  5. Heeger AJ, Long J, Opt. Photon. News, 7, 23 (1996)
  6. Gu G, Burrows PE, Venkatesh S, Forrest SR, Opt. Lett., 22, 172 (1992)
  7. Smith PM, Carey PG, Sigmon TW, Appl. Phys. Lett., 70, 342 (1997)
  8. Hong Y, Jung S, Choi J, Polym. Korea, 31(6), 526 (2007)
  9. Saeed MB, Zhan MS, Eur. Polym. J., 42, 1844 (2006)
  10. Fang X, Yang ZW, Gao L, Li Q, Ding M, Polymer, 44, 2614 (2003)
  11. Wei H, Fang X, Han Y, Hu B, Yan Q, Eur. Polym. J., 46, 246 (2010)
  12. Yu YH, Yeh JM, Liou SJ, Chen CL, Liaw DJ, Lu HY, J. Appl. Polym. Sci., 92(6), 3573 (2004)
  13. Park JW, Lee M, Lee MH, Liu JW, Kim SD, Chang JY, Rhee SB, Macromolecules, 27(13), 3459 (1994)
  14. Yang CY, Hsu SLC, Chen JS, J. Appl. Polym. Sci., 98(5), 2064 (2005)
  15. Wang HW, Dong RX, Chu HC, Chang KC, Lee WC, Mater. Chem. Phys., 94(1), 42 (2005)
  16. Ahn T, Choi YJ, Jung HM, Yi MH, Org. Electron., 10, 12 (2009)
  17. Grande JA, Modern Plastics, Feb., 35 (1999)
  18. Hasegawa M, Mita I, Kochi M, Yokota R, J. Polym. Sci. C: Polym. Lett., 27, 263 (1989)
  19. Hasegawa M, Shindo Y, Sugimura T, Ohshima S, Horie K, Kochi M, Yokota R, Mita I, J. Polym. Sci. B: Polym. Phys., 31, 1617 (1993)
  20. Wang XL, Li YF, Gong CL, Ma T, Yang FC, J. Fluor. Chem., 129, 56 (2008)
  21. Takahashi S, Paul DR, Polymer, 47(21), 7519 (2006)
  22. Chun B, Polymer, 35(19), 4203 (1994)
  23. Ju CH, Kim JC, Chang JH, J. Appl. Polym. Sci., 106(6), 4192 (2007)
  24. Hasegawa M, Horie K, Prog. Polym. Sci, 26, 259 (2001)
  25. Yokota R, Yamamoto S, Yano S, Sawaguchi T, Hasegawa M, Sato R, High Perform. Polym., 13, S61 (2001)
  26. Meador MA, Annu. Rev. Mater. Sci., 28, 599 (1998)
  27. Han JE, Jeon BK, Goo BJ, Cho SH, Kim SH, Lee KS, Park YH, Lee JY, Polym. Korea, 33(1), 91 (2009)
  28. Min U, Chang JH, Polym. Korea, 34(6), 495 (2010)
  29. Jin HS, Chang JH, Polym. Korea, 32(3), 256 (2008)
  30. Niwa M, Nagaoka S, Kawakami H, J. Appl. Polym. Sci., 100(3), 2436 (2006)
  31. Hasegawa M, Horiuchi M, Kumakura K, Koyama J, Polym. Int., 63, 486 (2014)
  32. Choi CH, Sohn BH, Chang JH, J. Ind. Eng. Chem., 19(5), 1593 (2013)
  33. Liaw DJ, Hsu PN, Chen WH, Lin SL, Macromolecules, 35(12), 4669 (2002)
  34. Liaw DJ, Huang CC, Chen WH, Polymer, 47(7), 2337 (2006)
  35. Dinc-Hart RA, Wright WW, Macromol. Chem., 143, 189 (1971)
  36. Ando S, Matsuura T, Sasaki S, Polym. J., 29, 69 (1997)