Pyrolysis is considered to be a sustainable energy technology and is practiced widely in waste management. In this study, three issues were explored: (a) the implication of crude glycerol addition to lignocellulosic biomass in pyrolysis, (b) the effect of microwave pretreatment on the pyrolysis product yields and (c) study of pyrolysis parameters and assessment of products quality. Characterization of the above glycerol-biomass mixtures along with pyrolysis products was performed by ICP-OES, SEM, EDX and GC techniques. It was resulted that higher liquid yield (max 59.53% v/v) obtained by pyrolysis of pretreated mixtures at 500 degrees C, compared to pyrolysis yields of non-pretreated mixtures, due to the prevalence of recombination reactions in pyrolysis of the microwave-pretreated mixtures. The gas produced from the microwave pretreated feedstock-based pyrolysis showed an enriched syngas (H-2 + CO) concentration (84.9% v/v), compared to the non-microwave pretreated samples (79.1% v/v), at 720 degrees C. No significant effect, either on the char yields or on the char structural characteristics were observed. Consequently, microwave pretreatment before pyrolysis, can serve as a potential pretreatment for enhanced production of fuels via post-pyrolysis. (C) 2015 Elsevier Ltd. All rights reserved.