An extensive survey of the porosity dependence of (room temperature) physical properties shows that mechanical properties and electrical and thermal conductivity, i.e. properties dependent on the local flux or fields in the material, follow minimum solid area models. This is shown extensively for elastic properties and tensile (flexure) strength, but consistency with other properties, e.g. compressive strength, hardness, electrical and thermal conductivity is also shown. Although data for ceramics is most extensive, data for rocks, metals, and carbon are included, since the consistency of these, especially of metals with ceramics, provides important support for the minimum solid area concept. While porosity characterization is generally minimal, expected model trends with pore character are corroborated by correlating processing and resultant expected pore character with porosity-property results. It is argued that properties dependent on mass should be better fit by a linear, i.e. rule of mixture, relationship between such properties and porosity. Support for this is shown in dielectric constant-porosity data.