In this paper, an active distributed (also referred to as semi-decentralised) fault recovery control scheme is proposed that employs inaccurate and unreliable fault information into a model-predictive-control-based design. The objective is to compensate for the identified actuator faults that are subject to uncertainties and detection time delays, in the attitude control subsystems of formation flying satellites. The proposed distributed fault recovery scheme is developed through a two-level hierarchical framework. In the first level, or the agent level, the fault is recovered locally to maintain as much as possible the design specifications, feasibility, and tracking performance of all the agents. In the second level, or the formation level, the recovery is carried out by enhancing the entire team performance. The fault recovery performance of our proposed distributed (semi-decentralised) scheme is compared with two other alternative schemes, namely the centralised and the decentralised fault recovery schemes. It is shown that the distributed (semi-decentralised) fault recovery scheme satisfies the recovery design specifications and also imposes lower fault compensation control effort cost and communication bandwidth requirements as compared to the centralised scheme. Our proposed distributed (semi-decentralised) scheme also outperforms the achievable performance capabilities of the decentralised scheme. Simulation results corresponding to a network of four precision formation flight satellites are also provided to demonstrate and illustrate the advantages of our proposed distributed (semi-decentralised) fault recovery strategy.