Terrestrial and microgravity pool boiling generated from a platinum wire heater in the presence of an acoustic standing wave were performed using degassed FC-72 Fluorinert liquid. The sound wave was created by driving a half wavelength resonator at a frequency of 10.15 kHz. Microgravity conditions were created using the 2.1 second drop tower on the campus of Washington State University. Burnout of the heater wire, often encountered with heat flux controlled systems, was avoided by using a constant temperature controller to regulate the heater wire temperature. The amplitude of the acoustic standing wave was increased from 28 kPa to over 70 kPa and these pressure measurements were made using a hydrophone fabricated with a small piezoelectric ceramic. Cavitation incurred during experiments at higher acoustic amplitudes contributed to the vapor bubble dynamics and heat transfer. The heater wire was positioned at three different locations within the acoustic field: the acoustic node, antinode, and halfway between these locations. Complete boiling curves are presented to show how the applied acoustic field enhanced boiling heat transfer and increased critical heat flux in the terrestrial environment, while in microgravity the acoustic field was found to be capable of filling the role of terrestrial gravity in maintaining nucleate boiling. Video images provide information on the interaction between the vapor bubbles and the acoustic field. (C) 2015 Elsevier Ltd. All rights reserved.