To develop small stationary reformers for on-site H-2 production, the active catalyst and its reaction kinetics were examined in order to study the steam methane reforming reaction. A 20 wt% Ni/gamma-Al2O3 was found to be a highly active catalyst within the investigated range of contact time from 1.16 to 3.64 g(cat)h/mol, which was good for developing the small stationary reformers. BET, XRD, and TEM analysis revealed that the high activity of the 20 wt% Ni/gamma-Al2O3 catalyst compared to the 15 wt% Ni/gamma-Al2O3 catalyst was strongly ascribed to the high number of Ni metal particles and the ratio of the number of the Ni metal species between the catalysts was calculated to be 1.33. Furthermore, the SMR reaction kinetics of the reversible first-order reaction between reactants and products was applied. This showed that the activation energies obtained by the two catalysts were the same because of the similar pore diffusion and heat transfer restrictions, and the similar Ni particle size in the catalyst pores. Also, it was found that the ratio of the pre-exponential factor was 1.30, which was exactly proportional to the ratio of Ni loading in the catalysts because it was strongly related to the collision density. Copyright (C) 2015, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.