This paper is devoted to the study of composite cathodes of La2NiO4+delta infiltrated into a Gd-doped ceria backbone. Porous Gd-doped ceria backbones are screen printed onto yttria-stabilized zirconia or Gd-doped ceria dense electrolytes, and infiltrated with a La and Ni nitrate solution (2:1 stoichiometry ratio). The influence of the preparation parameters on the polarization resistance, such as the concentration of the infiltration solution, the amount of infiltrated phase, the annealing temperature, the thickness of the electrode, and the nature of the electrolyte, is characterized by impedance spectroscopy performed on symmetrical cells. The optimization of these parameters results in a decrease of the polarization resistance down to 0.15 Omega cm(2) at 600 degrees C. Using the Adler-Lane-Steele model, the modelling of the impedance diagrams leads to the determination of the ionic conductivity as well as the surface exchange rate of the infiltrated electrode. (C) 2015 Elsevier B.V. All rights reserved.