Journal of Power Sources, Vol.300, 325-335, 2015
Evaluation of a pilot-scale sewage biogas powered 2.8 kW(e) Solid Oxide Fuel Cell: Assessment of heat-to-power ratio and influence of oxygen content
Biogas from anaerobic digestion of organic matter is a promising renewable energy source and fuel cells appear as a breakthrough technology to improve the performance of the biogas-to-energy valorisation chain. The vast majority of studies addressing biogas energy recovery through Solid Oxide Fuel Cells published in recent years correspond to simulations and lab-scale performance with synthetic biogas. This paper assesses the pilot performance of a 2.8 kW(e) SOFC unit powered with cleaned sewage biogas for around 700 h in a Wastewater Treatment Plant. The biogas thorough treatment consisting of a biological desulphurisation with a biotrickling filter followed by a deep cleaning step based on adsorption is successful for removing sulphur compounds, siloxanes and hydrocarbons. The influence of the heat-to-power ratio on fuel cell performance is investigated operating the system at O/C ratio of 2, reforming temperature of 550 degrees C, stack temperature of 800 degrees C and at a constant voltage of 43 V. At optimized conditions for electrical production satisfying heat demand in the WWTP, system electrical and thermal efficiencies account for 34% and 28%. Cogeneration efficiency remains constant at around 59-62% for all the heat-to-power ratios tested. Furthermore, the impact of the oxygen content in the biogas is also studied. (C) 2015 Elsevier B.V. All rights reserved.
Keywords:Biogas;Solid Oxide Fuel Cell;Gas reforming;Biogas treatment;Heat-to-power ratio;Energy valorisation