The passivating properties of solid electrolyte interphases (SET) at metallic lithium were characterized using the feedback mode of scanning electrochemical microscopy (SECM) and 2,5-di-tert-butyl-1,4-dimethoxybenzene (DBDMB) as redox mediator at OCP. The SET at Li allows electron transfer toward DBDMB with finite rate. In comparison to charged graphite composite electrodes, the electron transfer rate tends to be smaller at Li. Both, graphite composite and Li electrodes, show a local variation of electron transfer rates and temporal changes within a time span of hours. The long-term changes of SET passivity at metallic Li are dependent on the solvents in the liquid electrolyte. In addition, significant short-term changes of SET passivity occur at both electrodes. However, the frequency of such events is smaller for metallic Li compared to graphite. A strong decrease of SET passivity and a strong increase of fluctuations in the passivating properties are observed when the microelectrode mechanically touches the metallic Li and damages the SET. The changes of SET passivity by a mechanical touch are orders of magnitude larger compared to spontaneous changes. A local SEI damage by the microelectrode decreases not only the SET passivity locally, but also a few hundreds of mu m apart. (C) The Author(s) 2015. Published by ECS. All rights reserved.