In operating mines, acid mine drainage (AMD) is often treated using lime treatment. This process generates a significant amount of sludge that contains metal hydroxide precipitates, gypsum, and unreacted lime. The sludge may have interesting geotechnical and geochemical properties to be used as a part of covers (oxygen barriers) to prevent AMD generation from waste rocks and tailings. The main results of a project aiming to evaluate the use of sludge from the Doyon mine site (Canada) as a material in mine site rehabilitation are presented. The first part of the project involved detailed characterization of sludge, waste rock, and tailings samples. Then, laboratory column leaching tests were performed to evaluate the performance of the mixtures to control AMD produced by tailings and waste rocks. It was found that a sludge-waste rock mixture placed over waste rock reduces the metal loads in the column effluent, which remained acidic, as well as a mixture of sludge and tailings deposited over tailings can reduce metal content in effluents from tailings. (C) 2014 Elsevier Ltd. All rights reserved.