Particle cycle and residence time distributions in different regions, particularly in the spray zone, play an important role in fluid bed coating. In this study, a DEM-CFD (discrete element method, computational fluid dynamics) model is employed to determine particle cycle and residence time distributions in a laboratory-scale Wurster fluid bed coater. The calculations show good agreement with data obtained using the positron emission particle tracking (PEPT) technique. The DEM-CFD simulations of different size particles show that large particles spend a longer time in the spray zone and in the Wurster tube than small particles. In addition, large particles are found on average to move closer to the spray nozzle than small particles, which implies that the large particles could shield small particles from the spray droplets. Both of these effects suggest that large particles receive a greater amount of coating solution per unit area per cycle than small particles. However, the simulations in combination with the PEPT experiments show that this is partly compensated for by a longer cycle time for large particles. Large particles thus receive more coating per unit area per pass through the spray zone, but also travel through the spray zone less frequently than small particles. (C) 2015 Elsevier B.V. All rights reserved.