A study of the gate oxide/channel interface quality in ultra-scaled SOI omega-gate nanowire NMOS FETs with cross-section as small as 10 nm x 10 nm is experimentally presented by low-frequency noise measurements. The noise study has been efficiently applied for the characterization of various technological parameters, including strained channel, additional hydrogen anneal, or channel orientation difference. A method for rigorous contribution assessment of the two oxide/channel interfaces (top surface vs. side-walls) is also demonstrated. Quality of the interface is slightly altered among the 4-types of technological parameters and the structural variety down to nanowire. However, an excellent quality of Hf-based high-k/metal gate stack is observed and sustained in all the devices. In particular, efficient tensile strain stressor is demonstrated with high enhancement of the NMOS FET performance and preserved 1/f noise performance fulfilling the requirement for future CMOS logic node stated in the international technology roadmap for semiconductors. (C) 2015 Published by Elsevier Ltd.