Uniformity and wafer-to-wafer reproducibility of plasma etch processes are often related to the conditioning of the plasma etch chamber walls. For advanced complementary metal-oxide semiconductor fabrication, numerous metals are used which might deposit on the chamber walls during etch processes and as these metals are not always straightforward to remove, process instabilities can occur. This happens because recombination of atomic species on the chamber walls determines to a certain degree the plasma composition. Therefore, in this article, the impact of metal etch residues, especially titanium and tantalum residues, on plasma composition and uniformity is studied. The chamber walls are analyzed by x-ray photoelectron spectroscopy analysis of so-called floating samples and the densities of Cl, Br, O and F in Cl-2, HBr, O-2, and SF6 plasmas are monitored by optical emission spectroscopy. Plasma uniformity is checked by measuring etch rates across 300 mm silicon wafers. It is found that chlorine and bromine have similar recombination probabilities on the metals than on anodized aluminum. Fluorine and oxygen recombination, however, is strongly influenced by the presence of metal residues. Accordingly, for fluorine and oxygen based plasmas, metal residues showed to have an impact on the plasma uniformity. (C) 2010 American Vacuum Society. [DOI: 10.1116/1.3456619]