In the present study, the potential of synthesized hydroxyapatite microfibrillated cellulose (CHA/MFC) composite to remove chromium (VI) from aqueous solutions was investigated by batch tests under different experimental conditions. The chemical and morphological structures of adsorbent were investigated by scanning electron microscopy (SEM), energy dispersive analysis of X-rays (EDAX), element analyzer and Fourier-transform infrared spectroscopy (FTIR). The study also investigated the effects of process parameters such as initial Cr(VI) concentration, solution pH and temperature. Results of the present study revealed that the adsorption rate was very high in the beginning and over 94% of Cr(VI) removal was achieved within the first 5 min. At pH < 7 and >5, the overall Cr(VI) adsorption mechanism can be described to follow four different steps namely, (i) strong electrostatic interaction between positively charged adsorbent surface and negatively charged adsorbate in the aqueous solution, (ii) electrostatic attraction between positively charged adsorbent surface hydroxyl group and adsorbate, (iii) ligand or ion-exchange reaction between positively charged adsorbent surface and adsorbate and (iv) dissolution-precipitation. The thermodynamics of Cr(VI) onto CHA/MFC indicates spontaneous and endothermic nature of the process. Chromium(VI) uptake was quantitatively evaluated using the Langmuir, Freundlich and Sips isotherms models. The adsorption equilibrium data was well described by the Langmuir isotherm model with maximum adsorption capacity of 2.208 mmol/g of Cr(VI) ions on CHA/MFC. (C) 2015 Elsevier B.V. All rights reserved.