We investigated experimentally the formation of laser induced periodic surface structures (LIPSS) on titanium (Ti) metal upon irradiation with linearly polarized Ti:Sapphire femtosecond (fs) laser pulses of similar to 110 fs pulse width and 800 nm wavelength in air and water environments. It is observed that initially formed random and sparsely distributed nano-roughness (nanoholes, nanoparticles and nanoprotrusions) gets periodically structured with increase in number of laser pulses. In air at lower fluence, we observed the formation of high spatial frequency-LIPSS (HSFL) oriented parallel to the laser polarization direction, whereas at higher fluence formation of low spatial frequency-LIPSS (LSFL) were observed that are oriented perpendicular to the incident laser polarization. In water two types of subwavelength structures were observed, one with spatial periodicity of similar to lambda/5 and oriented parallel to laser polarization, while the other oriented perpendicular to laser polarization with feature size of lambda/4. The optimal conditions for fabricating periodic sub-wavelength structures are determined by controlling the fluence and pulse number. The fs laser induced surface modifications were found to suppress the specular reflection of the Ti surface over a wide wavelength range of 250-2000 nm to a great extent. (C) 2016 Elsevier B.V. All rights reserved.