Fracture-calibration pressure decline has been used for determination of the leakoff coefficient, a bulk variable describing the process of fluid influx into the reservoir, normal to the created fracture face. In this work, the fluid loss is modeled in terms of the controlling mechanisms : flow through the filter cake, the invaded zone, and the reservoir. A rigorous model describes unsteady-state fluid flow from fractures of varying area into the formation, with the filter cake considered as a time- and rate-dependent skin effect, The injection history is superposed on the pressure decline, This work provides a straight-line technique for determination of reservoir permeability and fracture-face resistance. Log-log diagnostic plots provide the means to recognize visually whether the transient response is dominated by flow in the reservoir or at the fracture face. We found that the pressure transient very frequently is dominated by the flow in the reservoir rather than through the filter cake, The reservoir permeability (an essential value for fracture design that is usually not available) can be estimated, while the model captures all trends of the falloff-pressure variation.