A novel series of anion conductive aromatic copolymers were synthesized from preaminated monomers (2,5-, 3,S-, or 2,4-dichloro-N,N-dimethylbenzylamine), and their properties were investigated for alkaline fuel cell applications. The targeted copolymers (QPE-bl-11a,-11b, and-11c) were synthesized via nickel-mediated Ullmann coupling polymerization, followed by quaternization and ion exchange reactions. Unlike the conventional method involving chloromethylation or bromination, this method provided copolymers with well-defined chemical structure. The hydrophilic components of the copolymers were composed of chemically stable phenylene main chain modified with high-density ammonium groups. Oligo(arylene ether sulfone ketone)s were employed as a hydrophobic block. QPE-bl-11a gave tough and bendable membranes by solution casting. The obtained membrane with the highest ion exchange capacity value (IEC = 2.47 mequiv g(-1)) showed high hydroxide ion conductivity (130 mS cm(-1)) in water at 80 degrees C. The QPE-bl-11a membrane showed reasonable alkaline stability in 1 M KOH aqueous solution for 1000 h at 60 degrees C. A platinum-free fuel cell was successfully operated with hydrazine as a fuel, the QPE-bl-11a as a membrane, and an electrode binder. The maximum power density of 380 mW cm(-2) was achieved at a current density of 1020 mA cm(-2) with O-2.