화학공학소재연구정보센터
Energy Conversion and Management, Vol.124, 305-314, 2016
Dry reforming of methane by combined spark discharge with a ferroelectric
The increasing anthropogenic emission of greenhouse gases (GHGs) is causing global warming which is a matter of deep public concern. Dry reforming of methane (DRM) is an attractive means of reducing the emission of GHGs, because it can convert CO2 and CH4 into syngas. Non-thermal plasma has been investigated for use in DRM and the results demonstrate that plasma can convert CO2 and CH4 into syngas at a lower temperature than catalysis, but the specific energy is relatively high. Combining a catalyst with non-thermal plasma in hybrid system can produce various synergistic effects that reduce specific energy. In this work, BaZr0.05Ti0.95O3 (BZT) with a perovskite structure and ferroelectric property is packed into the plasma reactor to form a hybrid system. The syngas generation efficiency of BZT with a spark discharge reactor is investigated. The spark discharge reactor yields 49.4% conversion of CO2 and 52.5% conversion of CH4 and the BZT packed bed reactor yields 79.0% conversion of CO2 and 84.2% conversion of CH4. With respect to energy utilization, the BZT packed bed reactor has an specific energy of 0.218 MJ/mol, which is 18.7% lower than that of the spark discharge reactor without a ferroelectric (0.268 Milmol). Characterization of BZT reveals that the presence of BZT increases the charge density in the plasma reactor, favoring CO2 and CH4 dissociation. Also, SEM and XPS results show that BZT is modified with plasma, resulting in a positive synergy between the plasma and the ferroelectric. (C) 2016 Elsevier Ltd. All rights reserved.