화학공학소재연구정보센터
홈 로그인 로그아웃 연락처 사이트맵
Polymer(Korea), Vol.23, No.4, 612-616, July, 1999
Export Citation
투명한 전도성 복합재료 PAN/Poly(3,4-ethylenedioxythiophene)의 제조 및 물성
Preparation and Physical Properties of PAN/Poly(3,4-ethylenedioxythiophene)Transparent Conductive Composite
이영관†, 이정희, 손용근1, 박연흠2, 백두현3
  • 성균관대학교 화학공학과
  • 1성균관대학교 화학과
  • 2성균관대학교 섬유공학과
  • 3충남대학교 섬유공학과
Youngkwan Lee†, Junghee Lee, Yongkeun Son1, Yun Heum Park2, and Doo Hyun Baik3
  • Department of Chemical Engineering, Sungkyunkwan University, Suwon 440-746, Korea
  • 1Department of Chemistry, Sungkyunkwan University, Suwon 440-746, Korea
  • 2Department of Textile Engineering, Sungkyunkwan University, Suwon 440-746, Korea
  • 3Department of Textile Engineering, Chungnam National University, Taejeon, Korea
E-mail:
초록
폴리아크릴로니트릴(PAN)을 매트릭스로 하여 투명한 전도성 고분자인 poly(3,4-ethylenedioxythiophene) (PEDOT)과의 복합재료를 제조하였다. 양이온기를 포함하는 전도성 PEDOT와 PAN과 정전기적 인력을 유도하기 위하여 PAN의 구조에 소량의 음이온기를 도입하였다. 복합재료를 제조하는데 있어서는 전도성 고분자를 매트릭스 상에서 in-situ로 중합하는 방법을 이용하였으며, 또한 이 기술을 실제 공정에 도입하기 위하여 PANWLRANF을 매트
A transparent conducting polymer composite was prepared using poly(acrylonitrile) (PAN) matrix and transparent and electrically conductive poly(3,4-ethylenedioxy thiophene)(PEDOT). In order to enhance the electrostatic interaction between the two components, a small amount of anionic group was introduced into the matrix. The conductive composite was prepated by the in-situ polymerization of EDOT in the PAN film. PAN fabric was also used a a matrix material to utilize this technique in the practical application. The presence of electrostatic interaction between conducting PEDOT and anion-containing matrix was monitored by the examination of the electrical porperties and their stability. The dyeing process was also performed on the transparent conductive fabric, and the variation of electrical property was also monitored.
Keywords:transparent conducting polymer composite;electrostatic interaction;dyeing process
  1. Peng FM, "Encycl. Polym. Sci. Eng.," vol. I, p. 426, John Wiley & Sons, New York (1985)
  2. Lee YK, Shin DK, Cho JC, Lee S, Polym.(Korea), 21(1), 161 (1997)
  3. Lee Y, Cho J, Park Y, Son Y, Paik DH, Polym.(Korea), 22(1), 167 (1998)
  4. Lee Y, Shin D, Cho J, Park YH, Son Y, Baik DH, J. Appl. Polym. Sci., 69(13), 2641 (1998) 
  5. Lee Y, Cho D, Park YH, Son Y, Baik DH, Mol. Cryst. Liq. Cryst., 316, 313 (1998)
  6. Pei QB, Zuccarello G, Ahlskog M, Inganas O, Polymer, 35(7), 1347 (1994) 
  7. Yamato H, Kai K, Ohwa M, Asakura T, Koshiba T, Wernet W, Synth. Met., 83, 125 (1996) 
  8. Bantikassegn W, Inganas O, Thin Solid Films, 293(1-2), 138 (1997) 
  9. Yoshikawa T, Miyata S, Polym. J., 22(1), 1 (1990) 
  10. McMurry J, "Organic Chemistry 4th Ed," Brooks/Cole Pub. Co. Pacific Grove, Ca (1996)
  11. Lee Y, Park S, Lee J, Polym.(Korea), 23(1), 122 (1999)
  12. Kim JS, Lee Y, Polym.(Korea), in press