화학공학소재연구정보센터
홈 로그인 로그아웃 연락처 사이트맵
Journal of Industrial and Engineering Chemistry, Vol.43, 164-169, November, 2016
DOI10.1016/j.jiec.2016.08.003  Export Citation
Micromorphology analysis of specific 3-D surface texture of silver chiral nanoflower sculptured structures
Stefan Talu, Miroslaw Bramowicz1, Slawomir Kulesza2, Atefeh Ghaderi3, Shahram Solaymani3, †, Hadi Savaloni4, and Reza Babaei5
  • Discipline of Descriptive Geometry and Engineering Graphics, Faculty of Mechanical Engineering, Department of AET, Technical University of Cluj-Napoca, 103-105 B-dul Muncii St., Cluj-Napoca 400641, Cluj, Romania
  • 1Faculty of Technical Sciences, University of Warmia and Mazury in Olsztyn, Oczapowskiego 11, 10-719 Olsztyn, Poland
  • 2Faculty of Mathematics and Computer Science, University of Warmia and Mazury in Olsztyn, Sloneczna 54, 10-710 Olsztyn, Poland
  • 3Young Researchers and Elite Club, Kermanshah Branch, Islamic Azad University, Kermanshah, Iran
  • 4Department of Physics, University of Tehran, North-Kargar Street, Tehran, Iran
  • 5Plasma Physics Research Center, Science and Research Branch, Islamic Azad University, Tehran, Iran
E-mail:
This study presents research into the three-dimensional (3-D) surface texture of silver chiral nanoflowers with three-, four- and five-folds spatial symmetry, which were produced using oblique angle deposition method with rotating sample holder. X-ray diffraction (XRD), atomic force microscopy (AFM), and field-emission scanning electron microscopy (FESEM) measurements were carried out in order to study 3-D morphology and structure of the samples at the nanoscale. Obtained results were found to provide an insight into important relationships between the structure of prepared nanoflowers and their properties. Results presented in the paper proved the usefulness of the method for preparation of high-quality, sculptured 3-D nanostructures with pre-designed shapes (with narrower and longer petals) and desired porosity. Specific structure, shape, and length scale of the 3-D deposits can be then verified in simulations for quick characterization of the samples. This analysis helps to understand their functional role in the test surface, in order to evaluate the relation among the 3-D microtextured surface.
Keywords:Silver chiral nano-flowers;Fractal analysis;Oblique angle deposition method;Sculptured thin films;Three-dimensional surface;micromorphology
  1. Jain PK, Lee KS, El-Sayed IH, El-Sayed MA, J. Phys. Chem. B, 110(14), 7238 (2006)
  2. Khlebtsov BN, Khanadeyev VA, Ye J, Mackowski DW, Borghs G, Khlebtsov NG, Phys. Rev. B, 77, 035440 (2008)
  3. Rosi NL, Mirkin CA, Chem. Rev., 105(4), 1547 (2005)
  4. Pal S, Tak YK, Song JM, Appl. Environ. Microbiol., 73(6), 1712 (2007)
  5. Talu S, Bramowicz M, Kulesza S, Shafiekhani A, Ghaderi A, Mashayekhi F, Solaymani S, Ind. Eng. Chem. Res., 54(33), 8212 (2015)
  6. Ghaderi A, Elahi SM, Solaymani S, Naseri M, Ahmadirad M, Bahrami S, Khalili AE, PRAMANA J. Phys., 77(6), 1 (2011)
  7. Talu S, Stach S, Ghodselahi T, Ghaderi A, Solaymani S, Boochani A, Garczyk Z, J. Phys. Chem. B, 119(17), 5662 (2015)
  8. Naderi S, Ghaderi A, Solaymani S, Golzan MM, Eur. Phys. J. Appl. Phys., 58, 20401 (2012)
  9. Talu S, Stach S, Solaymani S, Moradian R, Ghaderi A, Hantehzadeh MR, Elahi SM, Garczyk Z, Izadyar S, J. Electroanal. Chem., 749, 31 (2015)
  10. Stach S, Garczyk Z, Talu S, Solaymani S, Ghaderi A, Moradian R, Nezafat NB, Elahi SM, Gholamali H, J. Phys. Chem. C, 119(31), 17887 (2015)
  11. Robbie K, Brett MJ, Lakhtakia A, Nature, 384(6610), 616 (1996)
  12. Robbie K, Brett MJ, J. Vac. Sci. Technol. A, 15(3), 1460 (1997)
  13. Zhang ZY, Zhao YP, Appl. Phys. Lett., 90, 221501 (2007)
  14. Savaloni H, Haydari-Nasab F, Malmir M, Appl. Surf. Sci., 257(21), 9044 (2011)
  15. Savaloni H, Babaei R, Appl. Surf. Sci., 280(1), 439 (2013)
  16. Talu S, Bramowicz M, Kulesza S, Solaymani S, Shafikhani A, Ghaderi A, Ahmadirad M, J. Ind. Eng. Chem., 35, 158 (2015)
  17. Talu S, Stach S, Zaharieva J, Milanova M, Todorovsky D, Giovanzana S, Int. J. Polym. Anal. Charact., 19(5), 404 (2014)
  18. Talu S, Stach S, Raoufi D, Hosseinpanahi F, Electron. Mater. Lett., 11(5), 749 (2015)
  19. Stach S, Dallaeva D, Talu S, Kaspar P, Tomanek P, Giovanzana S, Grmela L, Mater. Sci. Poland, 33(1), 175 (2015)
  20. Talu S, Stach S, Valedbagi S, Elahi SM, Bavadi R, Mater. Sci. Poland, 33(1), 137 (2015)
  21. Talu S, Stach S, Mahajan A, Pathak D, Wagner T, Kumar A, Bedi RK, Surf. Interface Anal., 46(6), 393 (2014)
  22. Talu S, Stach S, Valedbagi S, Bavadi R, Elahi SM, Talu M, Mater. Sci. Poland, 33(3), 541 (2015)
  23. Talu S, Stach S, Mahajan A, Pathak D, Wagner T, Kumar A, Bedi RK, Talu M, Electron. Mater. Lett., 10(4), 719 (2014)
  24. Talu S, Stach S, Mendez A, Trejo G, Talu M, J. Electrochem. Soc., 161(1), D44 (2014)
  25. Bramowicz M, Kulesza S, Lipinski T, Szabracki P, Piatkowski P, Solid State Phenom., 203-204, 86 (2013)
  26. Kulesza S, Bramowicz M, Appl. Surf. Sci., 293, 196 (2014)
  27. Bramowicz M, Kulesza S, Rychlik K, Tech. Sci., 15(2), 307 (2012)
  28. Talu S, Micro and Nanoscale Characterization of Three Dimensional Surfaces. Basics and Applications, Napoca Star Publishing House, Cluj-Napoca, Romania, 2015.
  29. Talu S, Solaymani S, Bramowicz M, Naseri N, Kulesza S, Ghaderi A, RSC Adv., 6, 27228 (2016)
  30. Talu S, Bramowicz M, Kulesza S, Solaymani S, Ghaderi A, Dejam L, Boochani A, Elahi SM, Superlattices Microstruct., 93, 109 (2016)
  31. Dong WP, Sullivan PJ, Stout KJ, Wear, 178, 45 (1994)
  32. Sayles RS, Thomas TR, Wear, 42, 263 (1977)
  33. Thomas A, Thomas TR, J. Wave Mater. Interact., 3, 341 (1988)