Mine water from the abandoned coal mines is considered a good source of low enthalpy energy resource as the temperature of the mine water remains stable throughout the year and is suitable to be used for heating and cooling applications when implemented in conjunction with Ground Source Heat Pump (GSHP). The GSHP is considered to be a low carbon technology and its application for space heating and cooling is being actively investigated and developed by companies and local councils around the world. The open loop GSHP installations, in comparison to closed loop systems, are suitable and economical for large scale heating and cooling demands. This is because there is no time delay for heat transfer when compared with closed loop systems and because they use large volumes of coal mine water at a relatively constant temperature. A few installations both large and small scale open loop mine water heating and cooling systems have been recently constructed throughout the world. However, coal mine water is associated with relatively poor water quality in some cases, often characterised by high salinity and pyrite oxidation. Despite the fact that mine water temperatures are favourably inclined for an efficient GSHP operations, concerns have been raised over the possibility of damage to the equipment due to poor water quality caused by clogging of the heat exchangers due to pyrite oxidation (ochre) in particular. Not much information is available on the impact of ochre has on the performance of an open loop GSHP when it is operated using the coal mine water rich in pyrite. This paper presents a novel design and implementation of an open-loop system of GSHP operating in an ochre rich mine water environment. The results show that open loop systems, when combined with suitable heat pump and the associated design configurations of heat exchangers and maintenance procedures, could provide an efficient and reliable heating system at a lower cost. (C) 2016 Elsevier B.V. All rights reserved.