Solar parabolic trough collector (PTC) is the best recognized and commercial-industrial-scale, high temperature generation technology available today, and studies to assess its performance will add further impetus in improving these systems. The present work deals with numerical and experimental investigations to study the performance of a small-scale solar PTC integrated with thermal energy storage system. Aperture area of PTC is 7.5m(2), and capacity of thermal energy storage is 60 L. Paraffin has been used as phase change material and water as heat transfer fluid, which also acts as sensible heat storage medium. Experiments have been carried out to investigate the effect of mass flow rate on useful heat gain, thermal efficiency and energy collected/stored. A numerical model has been developed for the receiver/heat collecting element (HCE) based on one dimensional heat transfer equations to study temperature distribution, heat fluxes and thermal losses. Partial differential equations (PDE) obtained from mass and energy balance across HCE are discretized for transient conditions and solved for real time solar flux density values and other physical conditions of the present system. Convective and radiative heat transfers occurring in the HCE are also accounted in this study. Performance parameters obtained from this model are compared with experimental results, and it is found that agreement is good within 10% deviations. These deviations could be due to variations in incident solar radiation fed as input to the numerical model. System thermal efficiency is mainly influenced by heat gain and solar flux density whereas thermal loss is significantly influenced by concentrated solar radiation, receiver tube temperature and heat gained by heat transfer fluid. Copyright (C) 2016 John Wiley & Sons, Ltd.