Applied Catalysis B: Environmental, Vol.202, 605-610, 2017
Carbon dioxide Fischer-Tropsch synthesis: A new path to carbon-neutral fuels
Paradigm of climate change mitigation technologies is shifting from carbon capture and storage (CCS) to carbon capture and utilization (CCU). Here we propose a new path to CCU - direct CO2 conversion to liquid transportation fuels by reacting with renewable hydrogen produced by solar water splitting. The highly promising and CO2-neutral CCU system is possible by our discovery of a new catalyst that produces liquid hydrocarbon (C5+) selectivity of similar to 65% and greatly suppressed CH4 formation to 2-3%, which represents an unprecedented selectivity pattern for direct catalytic CO2 hydrogenation and is very similar to that of conventional CO-based Fischer-Tropsch (FT) synthesis. The catalyst was prepared by reduction of delafossite-CuFeO2 and in-situ carburization to Hagg carbide (chi-Fe5C2), the active phase for heavy hydrocarbon formation. The reference catalysts derived from bare Fe2O3, CuO-Fe2O3 mixture, and spinel CuFe2O4 are much less active and produce mainly light hydrocarbons, highlighting the critical role of delafossite-CuFeO2 as the catalyst precursor. The new catalyst breaks through the limitation of CO2-based FT synthesis and will open the avenue for new opportunity for carbon recycling into valuable liquid fuels at the similar conditions to industrially practiced CO-FT synthesis. (C) 2016 Elsevier B.V. All rights reserved.
Keywords:Carbon capture and utilization;Carbon-neutral fuels;Copper-iron catalyst;Liquid hydrocarbons;CO2 Fischer-Tropsch synthesis