Korean Chemical Engineering Research, Vol.55, No.2, 225-229, April, 2017
Dextran/DMSO/초임계 CO2계의 상거동 측정
Measurement of Phase Behavior for Dextran/DMSO/scCO2 System
E-mail:
초록
최근 약물전달시스템으로 널리 주목받고 있는 dextran의 미립자는 초임계 반용매 공정을 통해 얻을 수 있다. 초임계 반용매(SAS) 공정에서는 DMSO (dimethyl sulfoxide)에 용해되어 있는 dextran이 반용매인 초임계 CO2의 첨가에 의한 재결정으로 얻어진다. 본 연구에서는 이 공정의 적절한 운전조건을 제시하기 위하여 가변부피 셀을 이용하여 cloud point를 측정함으로써 Dexran/DMSO/CO2의 상거동을 관찰하였다 실험결과로부터 dextran 미립자 제조를 위한 초임계 반용매 공정의 적절한 온도(300.15 K~330.15 K), 압력(90 bar~130 bar), 용질의 농도(5 mg/ml~20 mg/ml)의 범위를 결정하였다.
Micron-sized dextran particles, which now attract wide attention as a promising drug delivery systems, can be prepared via the supercritical anti-solvent (SAS) process. In SAS process, dextran particles are obtained as a result of recrystallization of dissolved dextran in dimethyl sulfoxide (DMSO) on addition of supercritical CO2 as an anti-solvent. In this work, with an intention to provide information on the feasible operating conditions of the process, the phase behavior of Dexran/DMSO/CO2 is observed by measuring the cloud point in favor of a variable volume cell. From the experimental study, it is concluded that a feasible operating condition of the SAS process for preparation of dextran particles would be 300.15 K~330.15 K and 90 bar~130 bar, respectively, and solute concentration ranges from 5mg/ml to 20 mg/ml.
- Seo JH, Choi BK, Park TK, Prospect. Ind. Chem., 8(3), 60 (2005)
- Krukonis V, “Supercritical Fluid Nucleation of Difficult to Comminute Solids,” the AIChE Annual Meeting, San Francisco (1984).
- Tucker SC, Chem. Rev., 99(2), 391 (1999)
- Kajimoto O, Chem. Rev., 99(2), 355 (1999)
- Bahrami M, Ranjbarian S, J. Supercrit. Fluids, 40(2), 263 (2007)
- Lee YW, News Inf. Chem. Eng., 19(3), 325 (2001)
- Lee YW, News Inf. Chem. Eng., 19(4), 457 (2001)
- Lee JC, Kim CR, Byun HS, Korean J. Chem. Eng., 31(12), 2266 (2014)
- Bahrami M, Ranjbarian S, J. Supercrit. Fluids, 40(2), 263 (2007)
- Reverchon E, Adami R, J. Supercrit. Fluids, 37(1), 1 (2006)
- Paulaitis ME, “Chemical Engineering at Supercritical Fluid Conditions,” Ann Arbor Science(1983).
- Hyatt JM, Wong R, Lahiere J, Johnston KP, Ind. Eng. Chem. Res., 26, 56 (1987)
- Icoz DZ, Moraru CI, Kokini JL, Carbohydr. Polym., 62(2), 120 (2005)
- Han CN, Kang CH, Korean Chem. Eng. Res., 53(4), 445 (2015)
- Kang DY, Min BJ, Rho SG, Kang CH, Korean Chem. Eng. Res., 46(5), 958 (2008)
- Jang YS, Byun HS, J. Chem. Eng. Data, 59, 1931 (2014)
- Jang YS, Choi YS, Byun HS, Korean J. Chem. Eng., 32(5), 958 (2015)
- Byun HS, Korean Chem. Eng. Res., 54(2), 206 (2016)