화학공학소재연구정보센터
홈 로그인 로그아웃 연락처 사이트맵
Applied Chemistry for Engineering, Vol.28, No.3, 263-271, June, 2017
DOI10.14478/ace.2017.1019  Export Citation
말디토프 질량분석을 이용한 고분자의 특성분석
Analysis of Polymer Characteristics Using Matrix-assisted Laser Desorption/Ionization Time-of-flight Mass Spectrometry
강민정1, 성윤서1, 2, 김문주3, 김명수1, 변재철1, †
  • 1한국과학기술연구원 미래융합기술연구본부 분자인식연구센터
  • 2과학기술연합대학원대학교 생물화학과
  • 3연세대학교 신소재공학과
Min-Jung Kang1, Yunseo Seong1, 2, Moon-Ju Kim3, Myung Soo Kim1, and Jae-Chul Pyun1, †
  • 1Molecular Recognition Research Center, Materials and Life Science Division, Korea Institute of Science and Technology, Seoul 02792, Korea
  • 2Department of Biological Chemistry, University of Science and Technology, Daejeon 34113, Korea
  • 3Department of Materials Science & Engineering, Yonsei University, Seoul 03722, Korea
E-mail:
초록
최근에, 질량분석기술의 폴리머 분석에의 응용은 MALDI-TOF MS 개발 이후 급속도로 발전하였다. 이리뷰 논문은 현재까지 연구된 MALDI-TOF MS의 폴리머 특성분석에의 응용에 관한 최신 논문을 정리하였다. MALD-TOF MS는 바이오 폴리머와, 합성 폴리머의 평균분자량 분석, 폴리머의 시퀀스 분석을 통한 구조의 해석, 모노머의 성분석에까지 이용되고 있다. 엔드그룹의 특성과 농도를 분석하는 연구도 많이 진행되었고, 복잡한 폴리머의 분자의 분석에는 SEC와 MALDI-TOF MS를 연결한 분석법을 추천한다. MALDI에 tandem MS를 결합한 분석기술이나, 이온모빌리티를 응용한 질량분석기, TOF-SIMS, MALDI-TOF-Imaging 기술도 급격히 발전하고 있으며, 이의 폴리머 특성석에의 응용은 별도의 분리기술이 필요 없어 앞으로 더 많이 이용될 것으로 생각된다. 분자량, 시퀀스, 그리고 모노머의조성을 정확하게 계산해주는 소프트웨어와 고분자량(> 100 kDa)의 분석을 가능하게 해주는 기술이 개발된다면, 폴리를 연구하는 과학자들에게 MALDI-TOF MS의 이용은 문제점을 해결하고, 목적하는 폴리머를 합성하는 데 중요한 수단이 될 것이다.
The application of mass spectrometry to polymer science has rapidly increased since the development of MALDI-TOF MS. This review summarizes current polymer analysis methods using MALDI-TOF MS, which has been extensively applied to analyze the average molecular weight of biopolymers and synthetic polymers. Polymer sequences have also been analyzed to reveal the structures and composition of monomers. In addition, the analysis of unknown en -groups and the determination of polymer concentrations are very important applications. Hyphenated techniques using MALDI tandem MS have been used for the analysis of fragmentation patterns and end-groups, and also the combination of SEC and MALDI-TOF MS techniques is recommended for the analysis of complex polymers. Moreover, MALDI-TOF MS has been utilized for the observation of polymer degradation. Ion mobility MS, TOF-SIMS, and MALDI-TOF-imaging are also emerging technologies for polymer characterization because of their ability to automatically fractionate and localize polymer samples. The determination of polymer characteristics and their relation to the material properties is one of the most important demands for polymer scientists; the development of software and instrument for higher molecular mass range (> 100 kD) will increase the applications of MALDI-TOF MS for polymer scientists.
Keywords:polymer characteristics;MALDI-TOF MS;determination of molecular weight;chemical structure;composition of monomers;concentration of end groups
  1. Montaudo G, Samperi F, Monta MS, Prog. Polym. Sci, 31, 277 (2006)
  2. Wesdemiotis C, Solak N, Polce MJ, Dabney DE, Chaicharoen K, Katzenmeyer BC, Mass Spectrom. Rev., 30, 523 (2011)
  3. Kou D, Manius G, Zhan S, Chokshi HP, J. Chromatogr. A, 1216, 5424 (2009)
  4. Grubisic PRZ, Benoit H, J. Polym. Sci. B: Polym. Phys., 5, 753 (1967)
  5. Tatro SR, Baker GR, Fleming R, Harmon JP, Polymer, 43(8), 2329 (2002)
  6. Pretorius NO, Rode K, Simpson JM, Pasch H, Anal. Chim. Acta, 808, 94 (2014)
  7. Myers BK, Zhang B, Lapucha JE, Grayson SM, Anal. Chim. Acta, 808, 175 (2014)
  8. Karaca F, Millan M, Behrouzi M, Herod AA, Kandiyoti R, Anal. Chim. Acta, 547, 78 (2005)
  9. Fan W, Fan X, Tian W, Zhu X, Zhang W, Polym. Test, 40, 116 (2014)
  10. Chan TWD, Chan PK, Tang KY, Anal. Chim. Acta, 556, 226 (2006)
  11. Janco M, Alexander JN, Bouvier ES, Morrison D, J. Sep. Sci., 36, 2718 (2013)
  12. Tisdale E, Wilkins C, Anal. Chim. Acta, 820, 92 (2014)
  13. Zhang B, Zhang H, Myers BK, Elupula R, Jayawickramarajah J, Grayson SM, Anal. Chim. Acta, 816, 28 (2014)
  14. Adamus G, Rizzarelli P, Montaudo MS, Kowalczuk M, Montaudo G, Rapid Commun. Mass Spectrom., 20, 804 (2006)
  15. Kim JG, Kim JH, Song BJ, Lee CW, Im JS, J. Ind. Eng. Chem., 36, 293 (2016)
  16. Choi JY, Lee DI, Kim CJ, Lee CH, Ahn IS, J. Ind. Eng. Chem., 18(2), 611 (2012)
  17. Kafka AP, Kleffmann T, Rades T, McDowell A, Int. J. Pharm., 417, 70 (2011)
  18. Karas M, Hillenkamp F, Anal. Chem., 60, 2299 (1988)
  19. Gruendling T, Weidner S, Falkenhagen J, Barner- Kowollik C, Polym. Chem., 1, 599 (2010)
  20. Hillenkamp F, Karas M, Beavis RC, Chait BT, Anal. Chem., 63, 1193a (1991)
  21. Lietz CB, Richards AL, Marshall DD, Ren Y, Trimpin S, Mass Spectrometry in Polymer Chemistry, 85-118, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, Germany (2011).
  22. Rizzarelli P, Puglisi C, Rapid Comm. Mass Spec., 22, 739 (2008)
  23. Sato H, Nakamura S, Teramoto K, Sato T, J. Am. Soc. Mass Spec., 25, 1346 (2014)
  24. Hosseini S, Martinez-Chapa SO, In: Hosseini S, Martinez-Xhapa SO, (eds.), Fundamentals of MALDI-ToF-MS Analysis, 1-19, Springer Singapore, Singapore (2017).
  25. Lopez-Garcia M, Garcia MSD, Vilarino JLM, Rodriguez MVG, Food Chem., 199, 597 (2016)
  26. Abdelaziz OY, Brink DP, Prothmann J, Ravi K, Sun M, Garcia-Hidalgo J, Sandahl M, Hulteberg CP, Turner C, Liden G, Gorwa-Grauslund MF, Biotechnol. Adv., 34, 1318 (2016)
  27. Spring AM, Maeda D, Ozawa M, Odoi K, Qiu F, Yamamoto K, Yokoyama S, Polymer, 56, 189 (2015)
  28. Wang R, Liu W, Fang L, Xu C, Polymer, 51(25), 5970 (2010)
  29. Kim H, Dindulkar SD, Jeong D, Park S, Jun BH, Cho E, Jung S, J. Ind. Eng. Chem., 44, 195 (2016)
  30. Gies AP, Ellison ST, Stow SM, Hercules DM, Anal. Chim. Acta, 808, 124 (2014)
  31. Nishimori K, Ouchi M, Sawamoto M, Macromol. Rapid Commun., 37(17), 1414 (2016)
  32. Yol AM, Janoski J, Quirk RP, Wesdemiotis C, Anal. Chem., 86, 9576 (2014)
  33. Rizzarelli P, Puglisi C, Montaudo G, Rapid Comm. Mass Spec., 19, 2407 (2005)
  34. Sreerama SG, Elupula R, Laurent BA, Zhang BY, Grayson SM, React. Funct. Polym., 80, 83 (2014)
  35. Yol AM, Dabney DE, Wang SF, Laurent BA, Foster MD, Quirk RP, Grayson SM, Wesdemiotis C, J. Am. Soc. Mass Spec., 24, 74 (2013)
  36. Jackson AT, Yates HT, Scrivens JH, Green MR, Bateman RH, J. Am. Soc. Mass Spec., 8, 1206 (1997)
  37. Miladinovic SM, Kaeser CJ, Knust MM, Wilkins CL, Int. J. Mass spec., 301, 184 (2011)
  38. Lee DI, Kim CJ, Lee CH, Ahn IS, J. Ind. Eng. Chem., 18(3), 1186 (2012)
  39. Florczak M, Michalski A, Kacprzak A, Brzezinski M, Biedron T, Pajak A, Kubisa P, Biela T, React. Funct. Polym., 104, 71 (2016)
  40. Li YJ, Hoskins JN, Sreerama SG, Grayson SM, Macromolecules, 43(14), 6225 (2010)
  41. Kong LY, Su BG, Bao ZB, Xing HB, Yang YW, Ren QL, J. Chromatogr. A, 1218, 8664 (2011)
  42. Prokai L, Electrospray ionization (ESI-MS) and on-line liquid chromatography/mass spectrometry (LC/MS). In: Montaudo G, Lattimer RP, (eds.). Mass Spectrometry of Polymers, 149-175, CRC Press, Boca Raton, FL, USA (2001).
  43. Fenn JB, Angew. Chem.-Int. Edit., 42, 3871 (2003)
  44. Lin Z, Wang D, Peng A, Huang Z, Int. J. Polym. Anal. Charact., 22, 202 (2017)
  45. Fekete Z, Rofusz T, Angyal V, Szabo-Revesz P, Aigner Z, J. Pharm. Biomed. Anal., 97, 111 (2014)
  46. Mitchell G, Higgitt C, Gibson LT, Polym. Degrad. Stabil., 107, 328 (2014)
  47. Zaikin VG, Borisov RS, Polovkov NY, Zhilyaev DI, Vinogradov AA, Ivanyuk AV, Eur. J. Mass Spec., 19, 163 (2013)
  48. Becerra V, Odermatt J, Nopens M, J. Anal. Appl. Pyrolysis, 103, 42 (2013)
  49. Falkenhagen J, Weidner S, Hyphenated techniques. Mass Spectrometry in Polymer Chemistry, 209-235, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, Germany (2011).
  50. Crotty S, Gerislioglu S, Endres KJ, Wesdemiotis C, Schubert US, Anal. Chim. Acta, 932, 1 (2016)
  51. Altuntas E, Schubert US, Anal. Chim. Acta, 808, 56 (2014)
  52. Tanaka K, Waki H, Ido Y, Akita S, Yoshida Y, Yoshida T, Matsuo T, Rapid Comm. Mass Spec., 2, 151 (1988)
  53. Spring AM, Maeda D, Ozawa M, Odoi K, Qiu F, Yamamoto K, Yokoyama S, Polymer, 56, 189 (2015)
  54. Oh WC, Ko WB, J. Ind. Eng. Chem., 15(6), 791 (2009)
  55. Zappia S, Mendichi R, Battiato S, Scavia G, Mastria R, Samperi F, Destri S, Polymer, 80, 245 (2015)
  56. Marie A, Fournier F, Tabet JC, Anal. Chem., 72, 5106 (2000)
  57. Brandt H, Ehmann T, Otto M, Anal. Chem., 82, 8169 (2010)
  58. Gies AP, Mass Spectrometry in Polymer Chemistry, 33-56, Wiley- VCH Verlag GmbH & Co. KGaA, Weinheim, Germany (2011).
  59. Yang X, Wu T, Liu B, Du Y, Li H, Zhao S, Lu Y, Int. J. Mass Spectrom., 356, 1 (2013)
  60. Altuntas E, Weber C, Kempe K, Schubert US, Eur. Polym. J., 49, 2172 (2013)
  61. Wetzel SJ, Guttman CM, Flynn KM, Filliben JJ, J. Am. Soc. Mass. Spec., 17, 246 (2006)
  62. Chendo C, Rollet M, Phan TNT, Viel S, Gigmes D, Charles L, Int. J. Mass Spec., 376, 90 (2015)
  63. Wu T, Hu H, Jiang D, Du Y, Jiang W, Wang H, Polym. Test, 32, 426 (2013)
  64. Altuntas E, Weber C, Schubert US, Rapid Comm. Mass Spec., 27, 1095 (2013)
  65. Altuntas E, Weber C, Schubert US, Rapid Comm. Mass Spec., 27, 1095 (2013)
  66. Liu KJ, Die Makromolekulare Chemie, 116, 146 (1968)
  67. Otte DAL, Borchmann DE, Lin C, Weck M, Woerpel KA, Org. Lett., 16, 1566 (2014)
  68. Semple JE, Sullivan B, Vojkovsky T, Sill KN, J. Polym. Sci. A: Polym. Chem., 54(18), 2888 (2016)
  69. Rizzarelli P, Carroccio S, Anal. Chim. Acta, 808, 18 (2014)
  70. Rizzarelli P, Cirica M, Pastorelli G, Puglisi C, Valenti G, Polym. Degrad. Stabil., 121, 90 (2015)
  71. Cossoul E, Hubert-Roux M, Sebban M, Churlaud F, Oulyadi H, Afonso C, Anal. Chim. Acta, 856, 46 (2015)
  72. Barrere C, Maire F, Afonso C, Giusti P, Anal. Chem., 84, 9349 (2012)
  73. Wien K, Nucl. Instrum. Methods Phys. Res. Sect. B-Beam Interact. Mater. Atoms, 131, 38 (1997)
  74. Crecelius AC, Vitz J, Schubert US, Anal. Chim. Acta, 808, 10 (2014)
  75. Rivas D, Ginebreda A, Perez S, Quero C, Barcelo D, Sci. Total Environ., 566-567, 27 (2016)