A-gamma-(2,3-epoxypropoxy) propyltrimethoxysilane/graphene (GPTMS/rGO) coating on AA-2024 aluminum alloy was prepared by immersing the aluminum alloy sample in a silane/graphene oxide solution and curing in oven at 180 degrees C. Silanol groups were grafted onto graphene oxide sheets during hydrolysis. The graphene oxide was stacked layer by layer through silanol groups. The synthesized coating was characterized with Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, Raman spectra and scanning electron microscopy. The thickness of the composite coating increased greatly compared with that of silane coating, due to the mutual riveting effect. The covalent metallic-siloxane bonds (AIOSi) improved the adhesion force greatly. The laminate structure of graphene increased the hardness and declined the brittleness over 200 degrees C. The GPTMS/rGO coating showed good corrosion resistance. In 3.5% NaCl solution the anodic current density of the aluminum alloy sample with GPTMS/rGO coating was reduced by several orders of magnitude compared with those of bare aluminum alloy or the sample with graphene film. (C) 2017 Elsevier B.V. All rights reserved.